♦Pulse mode: monopulse/double-pulse♦Signal level: 3.3-24V compatible; serial resistance not necessary for the application of PLC.♦Power voltage: 24-100V DC or 18-80V AC, 75V AC recommended

♦Configurator Interface:USB to 485♦Maximum Current: 5A/8A♦Power voltage:(NT60) 24-50V DC,36V or 48V recommended / (NT86)24-100V DC or 18-80V AC.

♦Configurator Interface:USB port♦Maximum Current: 6A♦Power voltage: 24-50V DC,36V or 48V recommended

ECR60 ♦Open loop♦Maximum Current: 6A♦Power voltage: 24-80V DC. ECR86 ♦Open loop♦Maximum Current: 7A♦Power voltage: 24-100V DC or 18-80V AC.

ECT60 ♦Closed loop♦Maximum Current: 6A♦Power voltage: 24-80V DC. ECT86 ♦Closed loop♦Maximum Current: 7A♦Power voltage: 24-100V DC or 18-80V AC.

Conrol:Position,Speed,Torque control mode. Communication function: Equipped with 485 communication interface for multiple serial control. Power Range: 50W-3KW.

Number of pole pairs:5; Environment humidity:<90%>RH (no condensation)); Ambient temperature:-20℃~+50℃; Insulation class:F(155°); Withstand voltage:500VAC for one minute; Radial runout:0.06Max.(450g-load); Encoder line number:17bit magnetic encoder(23bit optical encoder,multiturn absolute encoder optional);

♦Typical application: Manipulator arm,textile equipment, Automation production line,Li-on battery equipment,New energy equipment,3C electrical equipment. ♦Control:Position,Speed,Torque control mode. ♦Commucation function: Equipped with EtherCAT commucation interface for multiple serial control. ♦Power Range: 50W-3KW.

1.Pulse controlled low-voltage servo drive Matching motor power is below 1.5kWEncoder resolution: up to 23bitOptimize anti-interference capabilityBetter hardware design and stabilityWith band brake control 2.EtherCATlow-voltage servo drive Matching motor power is below 1.5kWHigh speed response bandwidthshorter positioning timeStandard CiA402CSP/CSVICST/HM/PP/PV/PTWith band brake control 3.CANopea low-voltage servo drive Matching motor power is below 1.5kWHigh speed response bandwidthshorter positioning timeStandard CiA402The fastest baud rate 1Mbit/sWith band brake contro!

♦The power range of 0.05~1.5kW, ♦Equipped with communication encoders for higher positioning accuracy. ♦Rated speed of 3000rpm

♦Wiring: only connect three power lines and power lines, no need to connect Hall encoder lines, the software can calibrate motor parameters with one click ♦The driver adopts FOC magnetic field positioning technology and SVPWM technology ♦The driver supports potentiometer speed adjustment or 0~5V analog input signal ♦Has overcurrent, overvoltage, undervoltage and other protection functions, and optional output alarm prompts ♦Supports RS485 and IMicro-USB communication ♦Equipped with 3 common anode digital input ports and 1 common cathode digital output port ♦No need to connect Hall encoder line, strong anti-interference ability

♦The common micro-motor, pulling force is second only to the 9G standard version of the servo, is currently a super good cost performance of the servo! ♦Due to the reduced pull force, the manufacturer recommends that it be used only for small electric aircraft models, not for larger fixed-wing and electric helicopters. ♦180 degrees is left and right 90 degrees, 360 degrees is not stop rotating!

♦14 hours battery (rechargeable), back-lit 4 lines display. ♦Data logger function. ♦Can be used for mobile measurement, flow rate calibration, data comparing, meters running status checking. ♦Non-invasive transducers. ♦Wide bi-directional flow range of 0.01 m/s to 12 m/s. Wide liquid temperature range: -35℃~200℃. ♦Works reliably in both clean and somewhat dirty liquids with turbidity<10000ppm. ♦Lightweight and easily transportable in box.

♦14 hours battery (rechargeable), back-lit 4 lines display. ♦Data logger function. ♦Can be used for mobile measurement, flow rate calibration, data comparing, meters running status checking. ♦Non-invasive transducers. ♦Wide bi-directional flow range of 0.01 m/s to 12 m/s. Wide liquid temperature range: -35℃~200℃. ♦Works reliably in both clean and somewhat dirty liquids with turbidity<10000ppm. ♦Lightweight and easily transportable in box.

♦ 50-hour battery (rechargeable), 4.3'' color LCD multi-line display all integrated into a rugged, watertight enclosure. ♦ Data logger function. ♦ The heat measurement function by configuring with paired temperature sensors. ♦ Non-invasive transducers. ♦ Wide bi-directional flow range of 0.01 m/s to 12 m/s. Wide liquid temperature range: -35℃~200℃. ♦ Works reliably in both clean and somewhat dirty liquids with turbidity<10000ppm. ♦ Lightweight and easily transportable in box.

♦ Hot-tapped installation, no pipe line flow interrupted. ♦ No moving parts, no pressure drop, no maintenance. ♦ Spool-piece transducer for best accuracy and better long-term stability. ♦ High temp. Insertion transducers are suitable for high temperature of -35℃~150℃. ♦ Wide bi-directional Flow range of 0.03 to 36 m/s, and wide range of pipe sizes from DN65 to DN6000. ♦ Data logger function. ♦ The heat measurement function by configuring with paired temperature sensors

♦Works on the multi-channel transit-time principle. The accuracy is 0.5%. ♦Wide bi-directional Flow range of 0.01 m/s to 12 m/s. Repeatability is less than 0.15%. ♦3.6V 76Ah battery power supply，with lifetime over 10 years (measuring cycle: 500ms). ♦Low starting flow, super wide turndown ratio Q3:Q1 as 400:1. ♦With storage function. Can storage both forward flow and back flow ♦Hot-tapped installation, no pipe line flow interrupted. ♦Standard output is RS485 modbus, Pulse, NB-IoT, 4G, GPRS, GSM can be optional. ♦Two channels and four channels can be optional.

♦50-hour battery (rechargeable), 4.3'' color LCD mult-line display all integrated into a rugged, watertight enclosure. ♦± 0.5% high accuracy flow measurement. ♦Data logger function. ♦The heat measurement function by configuring with paired temperature sensors. ♦Non-invasive transducers. ♦Wide bi-directional flow range of 0.01 m/s to 12 m/s. Wide liquid temperature range: -35℃~200℃. ♦Works reliably in both clean and somewhat dirty liquids with turbidity<10000ppm. ♦Lightweight and easily transportable in box. ♦With the ability of Dynamic zero.

♦Dual channels Insertion transducers to ensure high accuracy 0.5% of the flow meter ♦Hot-tapped installation, no pipe line flow interrupted. ♦No moving parts, no pressure drop, no maintenance. ♦Spool-piece transducer for best accuracy and better long-term stability. ♦High temp. Insertion transducers are suitable for high temperature of -35℃~150℃. ♦Wide bi-directional Flow range of 0.03 to 36 m/s, and wide range of pipe sizes from DN65 to DN6000. ♦Data logger function. ♦The heat measurement function by configuring with paired temperature sensors

♦ Dual channel non-invasive transducers to ensure high accuracy 0.5% of the flow meter. ♦ Easy to install, cost effective, and require no pipe cutting or processing interrupt. ♦ Wide liquid temperature range: -35℃~200℃. ♦ Data logger function. ♦ Aluminum or Stainless steel SUS304 sensors for your optional. ♦ Thermal energy measurement capability can be optional. ♦ For commonly used pipe materials and diameters from 20mm to 6.0m. ♦ Wide bi-directional flow range of 0.01 m/s to 15 m/s