Propylene carbonate is a high efficiency desulfurization and decarbonizing solvent. It can be used to remove carbon dioxide in petroleum gas, petroleum cracking gas, oil gas and synthetic ammonia raw gas. It can also be a plasticizer, spinning solvent or water soluble dye, pigment dispersant, oily solvent, olefins and aromatics extractant.

Vinylethylene carbonate is a film forming additive for lithium-ion battery. It can make electrochemical reduction reaction on the surface of graphite cathode before the electrolyte, and forming a layer of thicker and higher impedance SEI film. The film is stable and not easy to decompose, which can inhibit the reduction and decomposition reaction of the electrolyte.

Vinyl carbonate is a colorless transparent liquid. It is an important intermediate in the synthesis of drugs, plant protectants, resin paints, and a variety of other chemicals. It also can be used as an film forming additive in lithium-ion battery electrolytes, and an overcharge protection additive for lithium- ion batteries.

1, 3-propanesulfonone can be used as electrolyte additive for lithium ion power batteries. It can reduce the solvent embedding in the electrode of lithium battery, prolong the electrode life, improve the cycle efficiency of lithium battery, increase the number of cycles of lithium battery and improve the service time of lithium battery.

Lithium difluoro(oxalato)borate, also known as LiDFOB, is a new lithium salt. It has excellent high and low temperature performance, and has good film forming performance, which can be used in lithium battery electrolyte to improve battery performance and prolong battery cycle life.

Fluoroethylene carbonate is the most commonly used electrolyte additive for Li-ion batteries, which can form a layer of SEI film inside the Li-ion batteries, the layer is dense and uniform, but does not increase impedance, so that it has good toughness and self-healing ability.

Tris(trimethylsilyl) Phosphite is a new electrolyte additive for lithium ion power battery, which can significantly improve the battery's low temperature performance and cycle performance.

Tris(trimethylsiloxy) borate is mainly used as an electrolyte additive for lithium-ion power battery, which can inhibit the increase of battery's internal resistance, improve the battery's cycle performance, enhance the battery's high rate cycle performance, and improve the battery's expansion performance during high temperature storage.

Tris(trimethylsilyl) Phosphate is a new type of electrolyte additive for lithium ion battery, which can significantly restrain the increase of battery resistance and the decrease of battery capacity.

Vinyl sulfate is mainly used as an electrolyte additive for lithium-ion batteries, which can effectively improve battery cycle times and charge-discharge performance, as well as increase the initial discharge capacity of batteries.

Lithium hexafluorophosphate is the most widely used lithium electrolyte, mainly used in lithium ion power batteries, lithium ion energy storage batteries, 3C digital batteries and so on.

Ethylene carbonate is an excellent organic solvent which can dissolve a variety of polymers. High purity Ethylene carbonate can be used as electrolyte solvent for lithium ion battery.

Methyl ethyl carbonate contains methyl, ethyl and carbonyl reactive groups, and its molecular structure is not symmetrical, so it has obvious advantages as a solvent such as paint, cellulose and resin.

Diethyl Carbonate is an environment-friendly organic solvent, mainly used as a solvent for cellulose ethers, nitrocellulose, natural and synthetic resins. In the electronic industry, it can be used as an electrolyte solvent for lithium-ion battery and capacitor.

Dimethyl carbonate is a chain of carbonate, its viscosity is lower than the ring carbonate. Its electrochemical stability is better, it can improve the low temperature performance of the Li-on battery electrolyte, so it is often used to produce lithium ion battery electrolyte.

BBIT is a new mildew preventive, mainly used to protect PVC, polyurethane, silicone resin, polyolefin, polyester and other polymers from bacteria, mould, algae erosion.

DBNPA is a broad spectrum and efficient fungicide, mainly used as a bactericidal and algicidal agent, it can prevent the growth of bacteria and algae in paper industry water, industrial cooling water, air conditioning water, metal processing lubricants, water emulsion, pulp, wood, plywood and coatings, and fibers.

DCOIT is a low toxicity, high efficiency, broad spectrum fungicide, mainly used for mold control, it has a good inhibition effect on diatom, bacteria, algae and barnacles, and can decompose quickly through hydrolysis, photodegradation and biodegradation, without cumulative effect, very safe for the Marine environment.

Chloroxylenol can be used in a variety of antibacterial processes, such as plastic, leather, paper pulp, textile antibacterial mildew treatment, it can also be used to make antibacterial soap, cleaning wounds and household antiseptic.

Dichloroxylenol is an effective broad-spectrum antibacterial disinfectant. It can kill Staphylococcus aureus, Escherichia coli and other bacteria as well as candida albicans and other fungi.