SCH-E600 Smart inverter

Sales SCH-E600 Smart inverter

Power ratings: 0.2kw-5.5kw

• Best performance/cost ratio, without compromise in reliability and quality

• Compact design, easy to integrate in your environment: DIN rail mounting, contactor-style I/0 Easy to setup: Simple set of optimized parameters for all basic functions and applications

• PID and HVAC functions - safety integrated - MODBUS - open for networking

• Internal EMC filter as standard: Ready for CE market

• Economical mass production on high automated and dedicated SMT lines

• General purpose drive - made for the worldwide market (CE/UL/CCC)

• Approved and certified by European independent bodies

• Built-in STO Function (only available for frame Q2)

Product Detail  

SCH-E600 Smart inverter

SCH-E600 is our newest compact inverter. It is designed as easy installation, user-friendly interface, DIN rail mounting, and simple operation.

Technical Specifications

Table2-2Technical Specifications for E600 Series Inverters 

 

  Items Contents
Input Rated Voltage Range 3-phase 380-480V(+10%,-15%)tc l
1-phase 220-240V±15%
Rated Frequency 50/60Hz,Frequency ±5%
Output Rated Voltage Range 3-phase 0-INPUT (V)
Frequency Range 0.50~650.0Hz
Control
Mode
Carrier Frequency 08-6K;Mfr's vale:3K
Input Frequency Resolution Digital setting:0.01Hz,analog setting:max frequency*0.2%
Control Mode Induction motor:VVVF
Start Torque 1HZ100%
Overload Capacity 150%rated current,60 seconds
Torque Elevating Manual Torque Promotion includes 1-20 curves.
  V/F Curve 3 kinds of modes:beeline type,n-th power type(1.5 th
power,1.8      th     power,1.9th     power,square)and
under-defined VVVF curve.
Startup mode Start directly
DC Braking DC braking frequency:0.20-50.00 Hz,
braking time:0.00~30.00s
Jogging Control Jogging frequency range:min frequency~max frequency
jogging acceleration/deceleration time:0.1~3000s
Auto Circulating Running and
multi-stage speed running
Terminals control can realize 15-stage speed running
Built-in PID adjusting Easy to realize a system for process closed-loop control
Auto voltage regulation (AVR) When source voltage changes,the modulation rate can be
adjusted automatically,so that the output voltage is
unchanged.
Operation
Function
Frequency Setting Potentiometer or external analog signal (0~5V,0~10V,
0~20mA,4~20mA);keypad (▲/V keys,terminal
external control logic and PC/PLC)
Start/Stop Contro Terminal control,keypad control or communication control
Running Command Channels 3 kinds of channels from keypad panel,control terminal and
MODBUS
Frequency Source Frequency sources:given digit,given analog voltage,given
analog current and given MODBUS
Accessorial frequency Source 0:Memory of digital given
1:External analog All
3:Stage speed adjusting
4:PID adjusting
Optional Built-in EMI filter,built-in braking unit
Protection
  Function
nput under-voltage,DC over-voltage,over-current,inverter over-load,motor over-load,over
heat,analog disconnected protection,etc
Display Output frequency,rotate-speed (rpm),output current,output voltage,DC-link voltage,PID
feedback,PID setpoint,types of fault,and parameters setting
LED indicators showing the working status of inverter
Fnvironment
  Conditions
Equipment Location In an indoor location,Prevent exposure from direct
sunlight,Free from dust,tangy caustic gases,flammable
gases,steam or the salt-contented,etc
Environment Temperature -10℃~+40℃
Environment Humidity Below 90%(no water-bead coagulation)
Vibration Strength Below 0.5g(acceleration)
Height above sea level 1000m or below
Protection
   level
IP20  
Applicable
   Motor
0.4~22kW

 

Product appearance

The external structure of E600 series inverter isplastic housings. Wall hanging type isadopted. Good poly-carbon materials are adopted through die-stamping for plastichousing with nice form, good strength and toughness.Taking E600-0030T3for instance, the external appearance and structure are shown as inbelow Fig.

 

E600 Series Appearance

E600 interface introduction

Structure No.  Content
Q1/Q2 structure1
1 8-core net cable remote keypad interface
2 RS-485 communication (A+,B-)

 

Panel Illustration

 E600 Series Panel Illustration

E600 Series  LED remote keypad

E600 Series  Single line of LCD keypad

Note:Local panels cannot be pulled out.Please select AAor A6 control panel to realize remote control, which isconnected by 8-core telephone cable. 

Table 3-3    Uses of Keys

Keys Names Remarks
Fun Fun To call function code and switch over display mode
Set Set To call and save data.
Up To increase data(speed control or setting parameters)
Down To decrease data (speed control or setting parameters
Run Run To start inverter
Stop/reset Stop or reset To stop inverter;to reset in fault status;to change function codes in a code
group or between two code groups.

 

Parameters Setting

This inverter has numerous function parameters, which the user can modify to effect different modes ofoperation control. User needs to realize that if user sets password valid (F107=1), user‘s password must beentered first if parameters are to be set after power off or protection is effected, i.e., to call F100 as per themode in Table 3-4 and enter the correct code. User‘s password is invalid before delivery, and user could setcorresponding parameters without entering password.

E600 Series Steps for Parameters Setting

E600 Series plan

Note:

1. Please only connect power terminals L1/R and L2/S with power grid for single-phase inverters.

2. 485 communication port has built-in standard MODBUS communication protocol. Communication port is on therightside of inverter.

3. The contact capacity is 10A/125VAC. NO/NC: 3A 250VAC/30VDC.

FAQ

Can I get some samples?

Yes, Sample order is available for quality check and market test. But you have to pay the express cost.

 

What's delivery time?

It usually takes about 3-5 working days for small order and 10-15 days for big order.

 

How to solve the quality problems after sales?

Take photos or videos of the problems and send to us.

We will make a satisfied solution for you within 24 hours after we confirm the problems.

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
X

Home

Supplier

Leave a message

Leave a message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.