Silicone rubber cold shrink tube En-CST

Sales Silicone rubber cold shrink tube En-CST

IPX8 class, stable and long-life during operation

Easy to install, only two steps (Cover, pull)

Fast installation, only 15-30 seconds needed to seal one connection

No limitation of spare space, especially design for MIMO &massive MIMO Antenna, also convenient to deploy on wall-mounted, high tower, pole-mounted condition etc.,

Easy to uninstall, only need knife to cut tube open

No skill required by engineers, uniform quality after installation, stable and good sealing and weatherproofing performance

Much time cost, and labor cost saving

Good operating capability under extreme cold and hot condition, highland, salt-mist situation, heavy windy weather, and anti-UV, anti-ozone


Product Detail  

En-CST is new silicone rubber cold shrink tube with special appearance. It’s specially designed to improve silicone cold shrink tube’s resistance to puncture and other external damage. It is also for weatherproofing protection on cable connections or joint, mostly applied on cell sites, such as connection between jumper cable and connector (7/16 DIN, N type or 4.3-10 connector) on RF equipment (RRU, Antenna and passive device), and joint between feeder and jumper cable. Comparing with tape sealing protection, time of installation is much shorter (15-30 seconds), more convenient, uniform waterproofing quality.

Silicone Cold Shrink Tube


Applications

1. It is widely used for waterproof seal in coaxial cables on telecommunication base stations, N-type connector, 1/2 jumper, Din head and 1/2 jumper connector;
2.It can be used as a waterproof seal for cable television connector;
3. It can be used as a waterproof seal for connecting wires and cables;
4.Insulation seal for other types of connection;


Property

Item

Parameter and Result

Test Method

Waterproof

Class

Pass, IPX8

IEC 60529:1989+A1:1999+A2:2013;

1 meter depth in water, duration: 8 hours

Physical and mechanical properties

Shore Hardness

A/41/1

ASTM D2240-15

Tensile Strength

9.89 MPa

ASTM D412-15aMethod A

Elongation

910%

ASTM D412-15aMethod A

Tear Strength

46.2 KN/m

ASTM D624-00(2012)

Brittleness temperature by impact

Pass

ASTM D746-14

Flammability

Horizontal burning

HB

UL 94-2013 Rev.6-2016 Section 7

Temperature

Installation temperature

-40℃ - 60℃

 

Operation temperature

-60℃ - 90℃

Stock temperature

-60℃ - 90℃

Note:Not for specifications. Values are typical, not to be considered minimum or maximum.


Specification

Mode

I.D

(mm)

Relaxed I.D

(mm)

Relaxed Length

(mm)

Description

en-CST-40

≥38

≤12

≥140

Cold Shrink Tube, designed for 1/2" jumper to equipment, only applicable for 7/16 DIN or 4.3-10 connector

en-CST-28

≥27

≤12

≥110

Cold Shrink Tube, designed for 1/2" jumper to equipment, only applicable for 4.3-10 or Type N connector

en-CST-AISG

≥22

≤10

≥110

Cold Shrink Tube, applicable for AISGcable to RET

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
X

Home

Supplier

Leave a message

Leave a message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.