American Type Drop Lock Series Scaffolding Frame is designed and complied to the requirements of OHSA & ANSI A10.8. It is made by dia. 1.69"x0.095" thickness high quality steel tubes. The locking device is Drop Lock . The frame is in 3' or 5' wide, and finishing is powder coating.

Aluminum Plywood Ladder Hatch Deck is made by 6061-T6 or 6082-T6 aluminum extrusion and fire-proof plywood panel, plank width 24" or 28", plank length from 7' to 10'. Hatch Ladder: Aluminum 6061-T6, 7-step ladder The plank complies with OHSA & ANSI A10.8 requirements. Safety load is 75lb/ft2.

Stringer Stair is a popular stairway for system scaffolding in American market. It is set for 7' scaffold bay length, 6'7" high rising and for 3'6" wide access. The stair stringers and treads can be seperated. It can help to reduce job difficulty of when installing or dismantling the stair. Also it is much more convenient for material storage and transportation.

Internal Stair is the stairway solutions for temporary access. 7' Bay Internal Stairs towers are constructed utilizing scaffolding frames,cross braces, guardrail brace, planks, stairs. The stair towers are set for7' scaffolding bay, and for 5', 6'4", 6'6", 6'7", 6'8" heights to meet different frame heights.

Mesh Ladders / Step Ladders / Steel Ladders / Straight Stairs are the economical stair acesses for H frames. The stair treads are made by 52x26x2.0mm steel oval tube, and the treads are made by mesh plates or punched hole plates or strip plates. They are used for 1219x1930mm H frames or cross lock scaffolding, for 1.83m or 2m scaffold bay.

Kwikstage Stairway (Steel) is the safe & easy solution for vertical access in lightweight with non-slip treads and platform. It is fabricated and designed to fit in a 1.27x2.44m scaffolding bay with 1.5m lift height. It is a specially design to fit in 1.2m tranom for two stairs side by side installation. The stairs are hot dip galvanized.

2.0m Aluminum Stretcher Stairs are designed specifically for use with the traditional steel kwikstage system scaffolding. They are pre-fabricated and designed to fit in a 1.27m x 2.44m bay with a 2.0m lift. The stair ends are flat so that it can lay on the transoms. The stairs are 560mm wide with a rise of 230mm. Two stairs (lift and right stretcher stair) will fit perfectly side by side on a 1.27m transom bay.

2.0m Aluminum Stretcher Stairs with Hooks are the type of stretcher stair with long u-shape hook welded at the two ends. By thehooks, the stairs can widely use for all kinds of modular scaffolding system, such as kwikstage, ring lock, cup lock scaffolding. They are pre-fabricated and designed to fit in a 1.27m x 2.44m bay with a 2.0m lift. The stair ends are flat so that it can lay on the transoms. The stairs are 560mm wide with a rise of 230mm. Two stairs (lift and right stretcher stair) will fit perfectly side by side on a 1.27m O-ledger bay.

Access Ladder is the light vertical access device for frame scaffolding. It uses ladder bracket to attach the ladder to the scaffold frame leg.

American Type Flip Lock Series Scaffolding Frame is designed and complied to the requirements of OHSA & ANSI A10.8. It is made by dia.1.625" or 1.69" high quality steel tubes with thickness 0.09" or 0.095". The locking device is flip lock. The frame is in 3' or 5' wide, and finishing is powder coating.

Scaffold Putlogs are used to span doorways to build around obstructions to connect frame towers and to solve other long-span applications.

Snap On Lock Frame Scaffolding Frame is kind of regional scaffolding system which is popular in California, U.S.A. It is designed and complied to the requirements of OHSA & ANSI A10.8. Its cross braces and guard rail braces have special design to match the snap on lock. The frame is fabricated by dia.1.625"x0.09" high quality steel tubes and the width is 3' or 5'. The finishing is powder coated. The snap on series frames are used mostly for residential building construction.

Canadian Lock Series Scaffolding Frames are manufactured using high strength 1.69″ O.D. x 0.095"t steel tubing, and feature fully coped joints for superior strength and durability. The frames are available in Blue Powder Coated, or Hot-dipped Galvanized finish. All of our frames come with pair of 1″ coupling pins and spring retainers, to keep them attached to the top of the frames. The frames are designed to meet or exceed both CSA and OSHA standards.

A Frame Scaffolding system is a kind of galvanized scaffolding frame which is popular in Australia. A frames are fabricated by O.D. 48.3x3.25mm/3.0mm and O.D. 27x2.3mm galvanized tubes, or they are fabricated by black tubes and then do hot dip galvanized. The scaffolds are designed and complied to the requirements of AS 1576. The scaffold frames are widely used for residential house projects for scaffolding access. The components and accessoies of A frame system mainly include: A frame, Cross Brace, Handrail Brace, Handrail Post, Interlock Steel Plank, Mesh Gate (Mesh Panel), Ladder Access Gate, Hop Up Bracket, Ladder, Base Jack (Base Plate), Coupling Pin, and so on.

Frame Scaffolding is the earliest type of scaffolding using in China. There are walk through frames and mason frames, also called H frames. They are fabricated by O.D.42x2.2mm steel tubes. Frame Scaffolding Components include Vertical Main Frames, Cross Braces, Coupling Pins and Cat Walk Boards with hooks. The Frame Scaffolding is quick erection scaffolding by main frame lock pins and cross braces. For Mobile Scaffold Tower, H Frame scaffolding used with Castor Wheels and Adjustable screw jack bases.

System Scaffolding Screw Jack is the adjustable base for modular system scaffolding. It provides not only heavy duty load bearing support to the scaffolding, but also provide leveling adjustment. Solid screw jack is made by the solid steel rod with dia.37.5mm after rolling the thread. Hollow screw jack is made by O.D 38x5mm or 5.5mm sealess steel tube. The jack nut is made by cast steel and to hold O.D 48.3mm scaffolding tube or O.D 60.3mm Shoring scaffold tube. Base plate is made by 6-8mm carbon steel.

Frame Scaffolding Screw Jack is the adjustable base jack for H frame scaffolding. It provides not only heavy duty load bearing support to the scaffolding, but also provide leveling adjustment. Solid screw jack is made by the solid steel rod with dia.34mm after rolling the thread. Hollow screw jack is made by O.D 34x4mm sealess steel tube. The jack nut is made by cast steel and to hold O.D 42-48mm frame leg tube. Base plate is made by 5-6mm carbon steel.

Punched Hole Cross braces enable scaffolding frames to maximize their loading capacity by balancing the frames on both ends.

Snap On Cross braces enable scaffolding frames to maximize their loading capacity by balancing the frames on both ends.

Guardrail Brace is one important part of frame scaffolding system, it provides fall protection to the people when working on the scaffold platform. Scaffold guard rail is made by dia.1.25" x 0.0787"t (O.D 32x2.0mm) pre-galvanized tube, or by black tube and then do electric galvanized, which endures hits and all kind of forces, preventing a person from leaving the area bounded by the platform.