Product introduction: 128 Transparent Iron Red
brown, with red copper or champagne color, red gold on the front, yellow on the side, lighter
Model NO. | M-127P | Substrate | Steel |
Certification | ISO14001 | Tin | Matel and Plastic |
Appearance | Liquid | Level | Finish Coat |
Main Raw Material | Acrylic | Method | Spray |
Specification | 1L, 3.75L / 2L, 2.5L / 4L, 5L | Components | Resin,Solvents, Pigment &Auxiliaries |
Shelf Life | 2Years | Qty/CTN | 12tins |
Trademark | Meklon | HS Code | 320820 |
1K Car Paint Noble Bright Clear Red Auto Refinish Primer
1K transparent iron red color characteristics: brown, with red copper or champagne color, red gold on the front, yellow on the side, lighter
Red is the color at the end of the long wave in the visible spectrum. Red represents auspiciousness, festivity, enthusiasm, unrestrainedness, passion, fighting spirit, and revolution. It is also festive, enthusiastic, and full of vitality; it is also nervous, thrilling, and disturbing. red
If you like red car refinish paint, come and contact me!
Meklon clear iron red car paint, below is the customer feedback picture, let's take a look
Basic information on Base Coat:
Base Coat is a paint that is suitable for use before topcoating and provides four main functions:
1. Prevent the metal surface from rusting.
2. Can be used as filling properties.
3. Provide good adhesion to the sub-layer primer and topcoat.
4. Isolate the influence of the old paint layer or primer on the topcoat, and avoid the phenomenon of absorption and reduce the gloss of the Automotive Paint
Surface Cleaning: | Use a Degreasing Cleaner to Remove Wax, Oil, and Other Impurities. |
The Mixing Ratio: (Volume Ratio) <15℃ 15-30℃ >30℃ |
1K Base Paint + Thinner 100 60-80 C-1K Kase Paint Use Quick-Dryin Type C-1K Kase Paint Use Standard Type C-1K Kase Paint Use Slow-Drying Type |
Sprsy Viscosity: | 14-16 Seconds(1 wata 2 # Cup 17±2 Seconds 25℃) |
Recommended Spray Tool and Air Pressure: R P Spray Gun: HVLP Spray Gun: |
Caliber:1.3mm Air Pressure:2.0-2.5(bar) Caliber: 1.3mm Air Pressure:1.8-2.0(bar) |
Number of Spray Layers Film Thickneen: Flash time: Rest Time: |
2-3 Level,15-25um At 23℃, Flash Dry Between Layers Layers for 5-10 Minutes After 10-15 Miuntes ,Spray the Varnish |
Customer Feedback