Product introduction: 128 Chestnut Red
brown, with red copper or champagne color, red gold on the front, yellow on the side, lighter
Model NO. | M-129P | Substrate | Steel |
Certification | ISO14001 | Tin | Matel and Plastic |
Appearance | Liquid | Level | Finish Coat |
Main Raw Material | Acrylic | Method | Spray |
Specification | 1L, 3.75L / 2L, 2.5L / 4L, 5L | Components | Resin,Solvents, Pigment &Auxiliaries |
Shelf Life | 2Years | Qty/CTN | 12tins |
Trademark | Meklon | HS Code | 320820 |
Car Paint Retro Noble Chestnut Red Premium 1K Car Primer
1K chestnut red car paint color characteristics: purple-brown, red-yellow on the front, purple-red on the side
Red can be mixed with blue to make purple, red can be mixed with yellow to make orange, red and green are contrasting colors (complementary colors)
The complement of red is blue. Red is one of the three primary colors, and it can be combined with yellow, blue, and three to make any color.
If you like this color car, please contact me, Meklon car paint wholesale, high quality and affordable price.
Looking forward to hearing from you
Basic information on Base Coat:
Base Coat is a paint that is suitable for use before topcoating and provides four main functions:
1. Prevent the metal surface from rusting.
2. Can be used as filling properties.
3. Provide good adhesion to the sub-layer primer and topcoat.
4. Isolate the influence of the old paint layer or primer on the topcoat, and avoid the phenomenon of absorption and reduce the gloss of the Automotive Paint
Surface Cleaning: | Use a Degreasing Cleaner to Remove Wax, Oil, and Other Impurities. |
The Mixing Ratio: (Volume Ratio) <15℃ 15-30℃ >30℃ |
1K Base Paint + Thinner 100 60-80 C-1K Kase Paint Use Quick-Dryin Type C-1K Kase Paint Use Standard Type C-1K Kase Paint Use Slow-Drying Type |
Sprsy Viscosity: | 14-16 Seconds(1 wata 2 # Cup 17±2 Seconds 25℃) |
Recommended Spray Tool and Air Pressure: R P Spray Gun: HVLP Spray Gun: |
Caliber:1.3mm Air Pressure:2.0-2.5(bar) Caliber: 1.3mm Air Pressure:1.8-2.0(bar) |
Number of Spray Layers Film Thickneen: Flash time: Rest Time: |
2-3 Level,15-25um At 23℃, Flash Dry Between Layers Layers for 5-10 Minutes After 10-15 Miuntes ,Spray the Varnish |
Customer Feedback