This device is to test whether zipper can bear the specified times of reciprocating pull action, under the horizontal and vertical tension effect. During testing, machine drive the puller of zipper at constant speed, undergoes reciprocating movement of 30 times per minute until reaches specified test times. So as to assess the quality of zipper.
Overview
Zipper Fatigue Tester M031A,
is to test whether zipper can bear the specified times of reciprocating pull action, under the horizontal and vertical tension effect. During testing, machine drive the puller of zipper at constant speed, undergoes reciprocating movement of 30 times per minute until reaches specified test times. So as to assess the quality of zipper.
Standards
|
CNS-1083, QB/T2171, QB/T2172, QB/T2173
BS 3084 annex F, BS EN 16732 annex F DIN 3419-1 SECTION 6.2.3.8, etc |
1. Touch screen Display, easy operation.
2. Adopts microprocessor with the function of auto inspecting left and right side of zipper
Running modes are optional
1) Counting method: times counter, time counter
2) Counting mode: Counting up, counting down
3. Sliding members adopts polish rod and linear bearing; Driving adopts debugging speed device and AC motor, to make whole machine to run stable and be low noise. Also available for adjusting speed.
Key Specifications
|
Model |
M031A |
|
Reciprocating stroke |
75mm |
|
Horizontal fixture width |
25mm |
|
Vertical fixture total weight |
0.28-0.34kg |
|
Distance between horizontal and vertical fixture |
6.35mm |
|
Sample opening angle |
60° |
|
Sample closing angle |
30° |
|
Counter |
0~999,999 |
|
Power Supply |
AC 220V 50/60HZ 80W |
|
Dimensions |
280×550×660mm(L×W×H) |
|
Weight |
35kg |
Material to be Tested
Subscribe to our weekly newsletter and receive exclusive offers on products you love!
X
Gold Supplier
