Type K is the most common thermocouple conductor(≥500℃), it has a good resistance against oxidation and can be recommended for oxidizing and inert atmospheres.It can not be used in sulphurous and vacuum atmospheres directly at a high temperature,as this will have a significant impact on the EMF values. The composition of positive(KP) is Ni90Cr10, negative(KN) is Ni97Si3.

Nickel chrome wire is a kind of non-magnetic alloy of nickel and chromium, it is widely used in heating elements. The maximum operation temperature of the heating elements is related to the wire diameter, it is better to choose thicker wires, the corrosive atmospheres also have a considerable relationship with the maximum operation temperature. The surface temperature is about 100C higher than the inner normally, when the operation temperature exceeds the limit, the oxidation of heating elements itself is accelerated, the heat resistance will be reduced, which is easily deformed,collapsed and even appreas to be broken, thereby shortening the service life.

Type J thermocouple alloys is suitable for using in vacuum, oxidizing and reducing atmospheres or inert gas atmospheres. Because of high temperature oxidizing quickly for JP, the measuring temperature range is restricted. The composition of positive(JP) is Fe100, negative(JN) is Cu55Ni45.

Type T thermocouple conductor is suitable for temperature below 0℃ with an upper temperature limit of 350℃(ASTM E230:370℃) and can be used in oxidizing and reducing atmospheres or inert gas atmospheres,The composition of positive(TP) is Cu100,negative(TN) is Cu55Ni45.

Pure nickel wire has good mechanical strength, corrosion resistance and high heat resistance. It is suitable for making electrical vacuum devices, electronic instrument components, and corrosion resistant materials.

SICC can supply Extension and Compensating bare thermocouple wire meet the standard IEC60584 and ASTM E230, The advanced melting skills combined controls the chemical composition to achieve the highest quality products , our produce base has the capacity of 900 tons annual that can meet your comprehensive requirements. whatever the bright annealed or oxidized conditions,all thermocouple conductors are calibrated at our lab ,this includes the testing of EMF, chemical composition,physical and thermoelectric properties before shipment.

Copper nickel wire has good mechanical strength, corrosion resistance and low resistance. It is suitable to make thermal components in low-voltage electrical appliances such as thermal overload relays, low-voltage circuit breakers and household appliances. Copper nickel alloys are also the key materials for manufacturing geothermal cables.

Type E bare thermocouple wire develops the highest source voltage(EMF) per℃ for measuring tiny temperature shift,it is suitable in oxidizing or inert gas atmospheres up to 900℃(ASTM E230:870℃), The composition of positive(EP) is Ni90Cr10, negative(EN) is Cu55Ni45.

Type N thermocouple conductor is suitable in the similar atmospheres with type K and the operating temperature is -200-1300℃. Its advantage is thermoelectric stability. The composition of positive(NP) is approximately Ni84.4Cr14.2Si1.4, negative(NN) is Ni95.5Si4.4Mg0.1.

Ratedetm perature:105℃/70℃/90℃ Rated voltage:150v The conductor is 0.2mm2-6mm2 tinned copper wiretinned FEP insulation,comply with ROHS enviremental standard PVC covering,comply with ROHS enviremental standard passes ULVW-1 flame test. Uniform insulation thinkness tonensure easy stripping and cutting .Used for electric motor lead cable.

Our photovoltaic solar power cable is rated 600V,1000V,2000V for meeting with AC and DC system.It is rated 90,105,125 or 150 ℃ dry and 90 ℃ wet.Single conductor,insulated and nonintegrally jeccketed,sunlight resistant ,photovoltaic wire rated for 90℃ wet or dry,600 V for interconnection wiring of grounded and ungrounded photovoltaic power system as described in section 630.31（And other applicable parts of the national electricl code,NFPA70).Rating s only apply to certain gage sizes.

Our photovoltaic solar power cable with uniform thickness,antioxidant,oxidation ressitance and low smke halogen free material.It can transfering the electrical power smoothly and stably.It can be connected with solar connector male and female very well.The length can be customized.Our cable were test in different working conditions .All products were test by the strict testing standard of laboratory before leaving our factory.

Our cable for new energy vehicle is using in most brands like JAC.Chery,YUTONG already. The simple specification of our cable as follow: Rated temperature:150℃ Rated voltage :AC1000V/DC 1500V Reference standard:QC/T1037 Our cable with feather of softness,high and low temperature resisitance,oil resistance ,acid and alkali resistance.

The electric cable is applied to transmit and distribute power in power transmission and distribution system of 35kV or lower. It is widely adopted in the fields including power, construction, mines, metallurgy, petrochemical industry and communication in complete replace of oil immersed paper insulated power cable and in partial re-place of PVC insulated power cable.

Our cable for new energy vehicle is using in most brands like JAC.Chery,YUTONG already. The simple specification of our cable as follow: Rated temperature:150℃ Rated voltage :AC1000V/DC 1500V Reference standard:QC/T1037 Our cable with feather of softness,high and low temperature resisitance,oil resistance ,acid and alkali resistance.

Our solar cable is pollution-free,noise-free,hight quality power energy,no limit fro the resource distribution area,no waste of fuel and short-trm construction.It is becoming the main role on the green energy-solar energy -the most popular and promoted engery all over the world.

Ratedetm perature:105℃/70℃/90℃ Rated voltage:150v The conductor is 0.2mm2-6mm2 tinned copper wiretinned FEP insulation,comply with ROHS enviremental standard PVC covering,comply with ROHS enviremental standard passes ULVW-1 flame test. Uniform insulation thinkness tonensure easy stripping and cutting .Used for electric motor lead cable.

Ratedetm perature:105℃/70℃/90℃ Rated voltage:150v The conductor is 0.2mm2-6mm2 tinned copper wiretinned FEP insulation,comply with ROHS enviremental standard PVC covering,comply with ROHS enviremental standard passes ULVW-1 flame test. Uniform insulation thinkness tonensure easy stripping and cutting .Used for electric motor lead cable.

The special cable for photovoltaic solar power generation system adopts double layer insulation protetive sheath to protect the conductor .Our cable with long service,high temperature resistance,UV radiation resistance waterprrof and susnscreen.The thinkness of the double layer insulated wire sheath is uniform to ensure low core eccentricity and safe tranmission of photovoltaic power generation.

Rated voltage Uo/U(um):1/35kv Volts-s5467 Conductor cross-section:25mm2-800mm2 Conductor material:Copper/Aluminum Conductor flexibility:Standard class Insulation:XLPE(Corss-linked polyethylene Inner sheath:PVC Armour type:Galvanized steel wires/steel tape Outer sheath:PVC/PE Colour:Black Lead free:Yes