VTP-5(300 liters per hour) Single Stage Vacuum Transformer Oil Purifier is mainly used to separate impurities, dehydration, degasification and improve the quality of used transformer oils. It mainly adopts vacuum purification principle, Italian three-dimensional flash technology, thin film evaporation technology and multi-stage precision filtration, so that the Vacuum Transformer Oil Filtration Machine can remove the water, impurities, gas and other harmful substances from oil and reach new oil standards. This Transformer Oil Filtration Machine also has the functions of oil pumping, oiling, vacuum drying, hot oil circulation filtering etc.
Optional: Online moisture monitor, flow meter, oil regeneration system, weather proof canopy, double axles or single axle trailer, dielectric strength tester, etc.
Technical Specification
Model |
VTP05 |
|
Capacity(L/min) |
5 (300L/Hr) |
|
Vacuum level |
-0.06~-0.095 Mpa |
|
Working pressure |
≤ 0.4 Mpa |
|
Temperature range |
20 ~ 80℃ |
|
Parameter after purification |
Breakdown voltage |
≥ 60KV |
Water content |
≤ 5ppm |
|
Gas content |
≤ 0.1% |
|
Filtering rate |
≥ 99.5% |
|
Filtering precision |
≤1 micron |
|
Continuous work |
≥200 hr |
|
No failure running |
≥5000 hr |
|
Power supply |
208V/220V/380V/400V/415/440V/460V/480V/575V (±10%), 50/60Hz, 3Phase |
|
Working noise |
65 dB |
|
Heating power (kw) |
10 |
|
Total power (kw) |
11 |
|
Inlet/outlet(mm) |
25 |
|
Weight (kg) |
200 |
|
Dimension (mm) |
L |
900 |
W |
700 |
|
H |
1000 |