Dump truck also known as a dumper, which is divided into two types: backward overturning and lateral overturning. The movement of piston rod is controlled by the control system, and the backward tilting is more common, and the piston rod is pushed to overturn the carriage, and a few two-way tilting is achieved.

Original imported power system, low noise, low fuel consumption and high efficiency.

Item MX938EN, weight 500g, ERD 598mm. This enduro carbon rim with its 31mm internal width is an ideal position in the middle of the strength, to weight, to width range, it works with many tire sizes.

SK-Tech’s mission is to reduce the world’s carbon emissions footprint by offering eco-friendly, affordable and accessible transportation for riders of all abilities. Our recreational models provide ideal transportation for work and play, while the commercial models offer an economical, utility solution for businesses seeking pollution-free transportation.

-Rim Brake:245°C high TG resin system -Stable brake surface. -Low braking failure rate. -25mm wide. -Tubeless rims

Carbon Disc Cyclocross Brake Fork is constructed from Toray T800.This fork that has passed EN/SGS quality test is a carbon road disc fork and is suitable for 700c road bikes,650B mountain bikes and cyclocross bikes.

Item XC727X (MX732XC), weight 310g, ERD 557mm. This asymmetric 650b mtb rim is light and stiff for xc, the unique asymmetric 3mm offset rim profile balances drive and non-drive side spoke tension to create a more durable and long lasting mtb wheels.

650b 52mm wide 34mm deep carbon am rims are constructed from T700&T800.The max rider weight of mountain bike 27.5 rims 120kg.

- carbon bike suspension frames - t800 bicycle framesets 650b - fast delivery for sale frame

- Powerway R51 Hubs - Spoke Hole: Front18/20(2:1), Rear 20/24(2:1)

Powerful load-bearing mountain bike / multi-wheel combination bicycle / shock absorber front fork. Suitable for various scenarios, such as travel, outdoor fitness, city work and competition.

Item TR926X (MX932TR), weight 390g, ERD 595mm. 29 inch carbon rim 26mm internal width and asymmetric 3mm offset profile, the unique asymmetric profile balance drive and non-drive side spoke tension to create a more durable mountain bike wheel.

Item R18-38X (RX38DH), weight 470g, ERD 469mm. Asymmetric rim profile with offset spoke holes for better triangulation of spoke angles and balance of tensions in a wheel build, resulting a stronger, stiffer, more compliant and reliable road wheels.

- Full T700 Toray Carbon fiber - Length 400mm - OD 31.6&27.2mm

ISUZU 4 CBM road sweeper truck, Japanese technology 4KH1-TCG40 engine 120HP, MSB 5-shift manual gearbox, stainless steel material water tank and dust tank, 4 brush for sweeping job, painting and logos depend on requirement

Assembled with multi-busbar PERC cells, the half-cell configuration of the modules offers the advantages of higher power output, better temperature-dependent performance, reduced shading effect on the energy generation, lower risk of hot spot, as well as enhanced tolerance for mechanical loading.

beiben 3138 camion benne, top sale north benz 380HP tipper trucks, WP10.380 engine, FAST 12-shift manual mechanical transmission gearbox, Q345 material dumper body with over 50T capacity for mining project

1.Assembled with multi-busbar PERC cells,the half-cell configuration of the modules offers the advantages of higher power output,reduces BOS cost effectively 2.Special half-cell design reduces the energy loss caused by shadows,better anti-shading performance; 3.Lower hot spot risks due to half-cell layout,offers an additional level of safety; 4.1500V DC voltage of the system,reducing the cost of the system side; 5.The overflow tank is waterproof with double layers,and the cross section contains hooked aluminum frame,which enhances the mechanical load strength by 10%; 6.Passed the certification test of 5400 Pa snow load and 2400 Pa wind load;

Type:27mm Wide 58mm clincher tubeless carbon rims Newest style 700C Clincher lightweight bicycle rims 58mm Deep model bicycle carbon wheels Tubeless ready 27mm wider U Shape design High quality Road bike clincher rims manufacturer 250°C high TG resin system Made of Full Toray T700&T800

• 25mm and 28mm width carbon rims optional • High-end DT Swiss 240 EXP rim-brake hubs • Shimano/Sram 11-12 speed freehub available • Sapim CX-Ray spokes, super light and aero • Compatible for 700*25C-45C tire (tubeless ready)