The changeover valve is combined by two valves that are different from nominal diameter--one is DN100, the other is DN150. A handwheel is put on the right side of the valve to help control the large WCB-made device. Designed as per DIN 3356, the valve is usually put in the oil industry.

The 4 inch 150LB ball valve is a 3-piece one with reduced port, A105 body, F6A stem, ball and seat. The The valve is made as per API6D and is tested under API 598.

The 4 inch cryogenic ball valve, designed as per API609, has many parts equipped RPTFE --It has the lowest coefficient of friction and the best corrosion resistance of any known plastic material, so that the valve can handle quite extreme situations.

The 150A JIS 5K globe valve is suitable for marine application. The Cast Iron globe valve is handwheel operated with FF flange.

The 2-piece floating ball valve, made in accordance with API 6A, has a design of reduced bore, fire safe design, anti blowout stem. With the RPTFE seat and PTFE O ring, the 4 inch WCB valve is certificate to serve you.

The 1 inch sleeved type plug valve is made of A216 WCB as per API 599. Thanks to its PTFE seat, the valve has excellent sealing and anti-corrosion performance. The valve is capable in working condition lower than 180 degree.

The 1 inch 800LB gate valve is designed as per API 602 with SW and handwheel operation. The stainless steel F316 gate valve has the construction of bolted bonnet, outside screw and yoke.

The DN250 PN25 gate valve is designed as per DIN 3352. With common parts of a valve, like bolted bonnet, outside yoke and handwheel, its body is made of WCB and STL. Valve body, bonnet,seat and other parts are promised to be traceable.

The 10 inch Dual-Plate WAFER Check Valve is made of WCB and is eligible to be put under pressure up to 30LB. All Dervos check valves are tested to API 598 and must meet or exceed all applicable API, ANSI and ASTM Standards.