The waterproof led driver ip67 12V 30W is water-resisitant and meet class 2 standard. Comforms to UL 8750 FCC standard. If the defect comes from the driver itself during the warranty, we promise to give a new replacement.
Label
Specification
model | SMT-012-030VWSW | SMT-024-030VWSW | |
Output | DC Voltage | 12VDC | 24VDC |
Voltage Accuracy | ±5% | ±5% | |
Rated current | 2.5Amp | 1.25Amp | |
Rated power | 30W | 30W | |
Voltage Regulation | ±0.5% | ||
Load Regulation | ±1% | ||
Input | Voltage Range | 100-277 VAC | |
Frequency Range | 47~63HZ | ||
Power Factor ( Typ.) | 0.99@120VAC 0.98@230VAC 0.95@277VAC | ||
THD(Typ.)@ full load | <15%@120VAC <20%@230VAC <20%@277VAC | ||
Full Load Efficiency(Typ.) | 82%@120VAC ; 83%@230VAC; 84%@ 277VAC | ||
AC Current(Typ.) |
7A, 50%, 420us @120VAC ; 30A,50% 90us@230VAC; 12A,50%480us@277VAC |
||
Leakage current | <0.50mA | ||
Protection | Short Circuit | Hiccup mode, recovers automatically after fault condition is removed. | |
Over Loading | ≤120% shut down o/p voltage, re-power on to recover | ||
Over temperature | 100℃±10℃ shut down o/p voltage, automatically recover after cooling. | ||
Environment | Working TEMP. | -40~+60℃ | |
Working Humidity | 20~90%RH,non-condensing | ||
Storage TEM.,Humidity | -40~+80℃,10~95%RH | ||
TEMP.coefficient | ±0.03%/℃(0~50℃) | ||
Vibration | 10~500Hz,2G 10min./1 cycle,period for 60min.each along X,Y,Z axes | ||
Safety&EMC | Safety standards | EN61347-1 EN61347-2-13 | |
Withstand voltage | I/P-O/P:3.75KVAC | ||
Isolation resistance | I/P-O/P:100MΩ/500VDC/25℃/70%RH | ||
EMC EMISSION | Compliance to EN55015,EN61000-3-2 (≥60%load) | ||
EMC IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,11, EN61547, light industry | ||
Others | Weight | 0.35Kg | |
Size | 260*32*20mm (L*W*H) | ||
packing | 50PCS/CTN | ||
Notes | 1. All parameters NOT specially mentioned are measured at 110VAC, 277VAC input ,Rated load and 25℃of ambient temperature. | ||
2. Tolerance:includes set us tolerance,line regulation and load regulation . | |||
3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation,the final equipment manufactures must be-qualify EMC Directive on the complete installation again. |
Compatible Light Type
The compact design of Smarts led driver 30w enables to install in limited space. Different types of 12v 24v constant voltage LEDs are compatible like lighting box, led strips. AQ lighting LED neon is recommended.
Related Products
Hidea powder Ultra thin triac dimmable 30w Class 2 12v 24v power supply for led strip light has a wide input range from 100-277VAC. Offer smooth dimming with ELV/MLV,triac dimmers.
Mode:SMT-012-030VTSP
Dimming Mode : Triac Dimming
Output Power : 30W
intput voltage:100~277V AC
Size:260*30*18.5MM (L*W*H)