All bearings are available in 52100 Chrome Steel or 440 Stainless Steel. Bearings also available with single shield or seal: suffix Z, RS, RU or TS. TTS is used smaller ball, load rating is lower than standard.
The 1 inch sleeved type plug valve is made of A216 WCB as per API 599. Thanks to its PTFE seat, the valve has excellent sealing and anti-corrosion performance. The valve is capable in working condition lower than 180 degree.
The DN250 PN25 gate valve is designed as per DIN 3352. With common parts of a valve, like bolted bonnet, outside yoke and handwheel, its body is made of WCB and STL. Valve body, bonnet,seat and other parts are promised to be traceable.
Use for HTC floor grinding machines Bond hardness: grinding X-soft ,soft, normal, hard , X-hard Grit size: 6~200#,as customized.
OEM High Precision Stainless Steel Custom CNC Machining Parts for automatic equipment. the tolerance± 0.01,surface treatment is electroless nickel deposition and the surface without any defects and scratches.
UCFL200 series 2-Bolt Flange Bearing Unit-SKET Standard duty two bolt flange bearing with a wide inner ring and two set screws. Cast iron housing with grease fitting. Be sure back to these pages frequently. We are always updating and adding sizes and styles.
The 10 inch Dual-Plate WAFER Check Valve is made of WCB and is eligible to be put under pressure up to 30LB. All Dervos check valves are tested to API 598 and must meet or exceed all applicable API, ANSI and ASTM Standards.
16" diamond saw blade cutting blade cutting disc for marble
specially designed for steel industry; popular for use on roll necks;
MR137ZZ Miniature Shielded Bearing 7mm x 13mm x 4mm, the inner diameter is 7mm, outer diameter is 13mm and the width is 4mm, Bearing is made of Chrome Steel, each bearing has 2 Metal Sheilds to protect the bearing from dust or any possible contamination, also bearing is pre-lubricated with grease.
for wincor cineo 4060 ATM Machine
New design open type slewing drive S9 Compared with the fence type rotary drive, the cost of the open rotary drive is lower. It is widely used in the field of some cranes, and it is composed of open base, slewing bearing,
It is high precision irregular mechanical parts that perpendicularity tolerance requirement 0.01 and has Φ0.1 of vent holes on the smooth semiconducting for surface of the components with electroless nickel and very highly strict to the surface without any defects.
Dark rod knife gate valve is installde by valve stem. There is no lifting action when the valve stem is opened and closed, which saves installation space. Manual knife gate valve can only be fully opened and closed, can not be adjusted and throttled.