Mold injection molding is a processing method used in mass production of some complex-shaped parts. The specific principle refers to: the plastic raw materials melted by heat are pushed by the screw of the injection molding machine into the cavity of the plastic mold under high pressure, and after cooling and solidification, the plastic molded product is obtained.
The 500X relief/hold valve is mainly used in fire fighting or other water supply systems to prevent system overpressure or to maintain pressure in fire fighting water supply systems.
MR128ZZ Miniature Shielded Bearing 8mm x 12mm x 3.5mm, the inner diameter is 8mm, outer diameter is 12mm and the width is 3.5mm, Bearing is made of Chrome Steel, each bearing has 2 Metal Sheilds to protect the bearing from dust or any possible contamination, also bearing is pre-lubricated with grease.
Bearings KOYO 32008jr are single row taper roller bearing with size 40*68*19mm, and the material Chrome steel Gcr15 ,we have this bearing with 665 PCS in stock now .
VOE14640025 bearings are used in the final drive motor system of VOLVO heavy machinery equipment: VOE14640025 BEARING Volvo parts EC380E, EC480D, EC480E, EC480EHR
Dental Torque Wrench--Dental implant tools, suitable for dental surgery, dental laboratory.We accept OEM/ODM service,can custom as sample or drawing.
The changeover valve is combined by two valves that are different from nominal diameter--one is DN100, the other is DN150. A handwheel is put on the right side of the valve to help control the large WCB-made device. Designed as per DIN 3356, the valve is usually put in the oil industry.
well-required action and high accuracy Suitable for producing: double color melamine products
Caterpillar Excavator Cat200B Arm Cylinder Seal Kit 1890282
H71H(W) Check valve consists of valve body, disc, spring, etc. It is installed horizontally or vertically in the pipeline system to prevent media backflow. It has short structure, small volume and light weight.Fast disc closing, low water hammer pressure;The flow passage is unobstructed and the fluid resistance is small;Sensitive action, good sealing performance.
Fork positioners can easily handle pallets with different widths to help meet complex material handling demands. The M series fork positioner allows you to hydraulically move the forks closer together or further apart, individually or together. This is particularly useful when you have to handle a variety of pallet sizes. Damage to pallets and products will be reduced as well.
Light type slewing bearing available without gear, with internal gear or with external gear, range 200mm to 3000mm OD.