High Efficiency four-head Automatic edge grinding machine to save labor cost. Automatic Grinding Machine Certificate available.

Plastic Injection Molding for Safety Helmet

Plastic Injection Mold for Medical Product

High Quality Plastic Blowing Tool Case

Use for removing the old layer and grind out a clean concrete surface

5.5t hydraulic excavator uses a mechanical injection oil engine with national II emission standards and has characteristics of strong power, energy conservation and environmental protection, high reliability and excellent performance.

The changeover valve is combined by two valves that are different from nominal diameter--one is DN100, the other is DN150. A handwheel is put on the right side of the valve to help control the large WCB-made device. Designed as per DIN 3356, the valve is usually put in the oil industry.

suction cups for NCR pick line assembly

Fast cutting with long lifespan Save energy in power and stone

MR128ZZ Miniature Shielded Bearing 8mm x 12mm x 3.5mm, the inner diameter is 8mm, outer diameter is 12mm and the width is 3.5mm, Bearing is made of Chrome Steel, each bearing has 2 Metal Sheilds to protect the bearing from dust or any possible contamination, also bearing is pre-lubricated with grease.

. Item: KH0824PP . Type: Linear Motion Ball Bushing . Number of Ball Rows: 4 . Size: 8mm x 15mm x 24mm

The forged steel ball valve is made of A105 body and 17-4PH trim with RTJ flange end and lever operation. This floating ball valve features reliable sealing performance and easy operation.

VOE11701338 bearings are used in the dump truck Bearing system of VOLVO heavy machinery equipment： 11701338 BEARING Volvo parts A25D A25E A25F A25F/G A25G A30D A30E A30F A30F/G A30G A35C A35C VOLVO BM A35D A35E A35E FS A35F A35F FS A35F/G A35F/G FS A35G A40 A40 VOLVO BM A40D A40E A40E FS A40F A40F FS A40F/G A40F/G FS A40G A45G A45G FS A60H T450D

SANG diamond polishing pad is equipped with backer pad, as well M10, M14, M16, 5/8"-11 bolts for various machines.

Fujitsu F510 Top Unit and all its spare parts

Advanced CNC machine imported Rich experience in melamine industry since 2002

Shunhao R&D team can also develop different moulds according to customers' requirements. Shunhao Machinery has been focus on melamine machines and moulds for 19 years.

The Nalift Diesel Forklifts capacity are 2000kg, 2500kg, 3000kg, 3500kg, mast lift height up to 6m. Nalift Diesel Trucks standard equipped with integral side shift, fork positioner, Krupp mast steel, hydraulic brake, etc

UCP200 series Pillow Block Mounted Bearing Unit: Two bolt, pillow block, mounted bearing units, cast iron housing, inch or metric dimensioned shaft sizes.