1.109-00033 bearings are used in the final drive bearing system of Doosan Heavy Machinery Equipment: 1.109-00033 BEARING;ANGULAR BALL Doosan parts：DX140LC，DX140LC-3 / DX160LC-3，DX160LC，DX180LC-3，DX180LC-5

206-26-71240 bearings are used in the Excavato rSlewing gearbox system of KOMATSU： 206-26-71240 BEARING KOMATSU parts：PC220-7, PC230-7-CG, PC240LC-7K, PC270-7, PC290NLC-7K

25Z494D11 bearings are used in the Excavator Slewing Gearbox Bearing system of KOBELCO heavy machinery equipment： 25Z494D11 BEARING Kobelco parts SK200LC K907 K907D K907DLC K907LC MD200BLC MD200C SK150LC SK160LC SK200 ED180 SK210 SK210LC

Full Nalift articulated forklifts ranges are standard equipped with 80V AC ZAPI dual-core controller which makes it has a lower failure rates and creates lower heat after long time using, 80V AC lifting motor and driving motor and 80V 400ah-600ah lead acid battery or li-ion battery which provides stronger power, increases efficiency and greatly reduces maintenance costs.

for NCR ATM machine

Basic size: 76x19x6/3mm Material SKD11 Hardness 60-61HRC Teeth needed To get a quote or more details sooner about this pneumatic air knife holder , please email us at phoebe@lcblade.com OR whatapp +86 13399550005 Disk knife with bearing inside is a part of pneumatic knife holder, usually with material 9CrSi, SKD11, HSS and so on.

Komatsu Excavator Pc120-3 Arm Cylinder Seal Kit 707-98-38600

Shunhao melamine pressing machine for UF toilet seat and cover is using powder, 600tons, Taiwan technology and long time running quality.

Disc separator is used to separate slitted strips of coiling sheet of Aluminum, Copper, Stainless, Q235, and so on. To ensure no interference between neighbor rolls while rewinding process. Well used materials of separator disc: 65Mn, GCr15, 9SiCr, SKD11. Super hardness,bur free,high wear resistance and long work life are the merits of our knifes and spacer discs.

Komatsu Excavator Pc200-5 Arm Cylinder Seal Kit 707-99-57200

706-77-43880 bearings are used in the Excavator slewing motor system of KOMATSU： 706-77-43880 BEARING KOMATSU parts fit：PC350-8, PC300-8, PC1250-8, PC400-8, PC340-6, PC450-6, PC380-6, PC400-6.

XKAH-00015 bearings are used in the Hyundai's final drive crankshaft .heavy machinery equipment： XKAH-00015 HYUNDAI BEARING parts Apply to R140LC-7, R210LC7, R210NLC7

XKAQ-00218 bearings are used in the final drive Bearing system of HYUNDAI heavy machinery equipment： XKAQ-00218 HYUNDAI BEARING parts Apply to R110-7, R110-7A, R140LC-7, R140LC-7A, R140LC9, R140LC9A, R140LC9S, R160LC7, R160LC7A, R160LC9, R160LC9A, R160LC9S, R180LC7, R180LC7A, R180LC9, R180LC9A, R180LC9S, R210LC7, R210LC7A, R210LC7H

Check valve can regulate the opening and closing speed. When the pump starts or stops running, it can be adjusted to the best opening or closing speed with the on-site adjustment.It is suitable for mining enterprises and high-rise buildings to reduce water hammer and water hammer in direct water supply and drainage system by water pump, so as to achieve the effect of safe closing.

1) Grade: G10/FR4 2) Color: Natural Green 3) Thickness range: 100mm~180mm (4 inches~7 inches) 4) Sheet size: 915*1220mm; 1020*1220mm

06030-23134 bearings are used in the Bulldozer Bearing system of Komatsu heavy machinery equipment： 06030-23134 BEARING KOMATSU parts D150A, D155A, D155C, D155S, D155W

49-201324-000A Diebold Card Reader With Magnetic Pre-read Read/Write Head

ATM Machine Parts Diebold Opteva Feed Shaft 49204018000A 49204018000D