4192975 bearings are used in the Excavator Final drive system of Hitachi : 4192975 BRG.;ROL. Hitachi parts 218HSL, 270C LC JD, CX350DR, EX200-5Z JPN, EX270, EX270-5, EX280H-5, EX300, EX300-2, EX300-3, EX300-5, EX300-5HHE, EX300LC-5M, EX300LCLL-5, EX300LCLL-5M, EX345USR(LC), EX350H-5, EX350H-5HHE, EX350K-5
XKAQ-00986 bearings are used in the final drive Bearing system of HYUNDAI heavy machinery equipment: XKAQ-00986 HYUNDAI BEARING parts Apply to R110-7, R110-7A, R140LC9, R140LC9A, R140LC9S, R160LC9, R160LC9A, R160LC9S, R180LC9, R180LC9A, R180LC9S, R210LC7A, R210LC9, R210LC9BC, R210LC9BH, R210NLC9, R220LC9A, R220NLC9A, R235LCR9
Single row four point contact ball slewing bearing available without gear, with internal gear or with external gear, range200mm to 3000mm OD.
MR95ZZ Miniature Shielded Bearing 5mm x 9mm x 3mm, the inner diameter is 5mm, outer diameter is 9mm and the width is 3mm, Bearing is made of Chrome Steel, each bearing has 2 Metal Sheilds to protect the bearing from dust or any possible contamination, also bearing is pre-lubricated with grease.
Adjustable Flange Bearing Units is one design of mounted ball bearing unit, UCFA2 is the suffix of this type bearing unit, the bearing unit have UC chrome steel pillow block bearings and FA housing with cast iron materials.
Superabrasive's diamond tooling over covers nearly any concrete and stone floor application-coating removal,grinding,polishing,maintenance,edge work,and more.
2207-27-72220 bearings are used in the Excavator Final drive system of KOMATSU: 207-27-72220 BEARING KOMATSU parts:PC360LC-10,PC300-8M0,PC350-8M0
Nalift25 rated capacity 2500kg, mast height from 4300mm to 12400mm. It can operate on any floor surface, both inside and outside, eliminates double handling, move pallet from lorry to rack in one step, so it save much time and money.
Hifoune FD20T is a pick up forklift at 2ton capacity which uses diesel engine, choosable engine such as xinchai isuzu,etc, color customizable, please contact us for more information.
A whole set of knife of a slotter machine consitsts mostly of slot knife, bottom knife, spacer, and valve knife. Slotter knife is also called "Sector knife" by manufacturers due to its curved shape. The function of slotter knife is obviously slot, slotting folding parts of corrugated cardboard by the teeth which coud be serrated or crescent-shaped. Details: Basic size: Angle of sector x (R-r) x T Material: GCr15, 9SiCr, SKD11, LD, HSS Hardnss: 57-64HRC Teeth type: Serrated or crescent-shaped Roughness of surface: Ra0.2-Ra0.8
20Y-27-11570 bearings are used in the Excavator Final drive system of KOMATSU: 20Y-27-11570 BEARING KOMATSU parts:PC150HD-5K,PC180LC-5K,PC200-5C,PC200-6Z,PC210-6,PC210LC-5K,PC220-5C,PC220-6Z
207-27-61310 bearings are used in the Excavator Final drive system of KOMATSU: 207-27-61310 BEARING KOMATSU parts PC250, PC250HD-6Z, PC300, PC300SC,PC300-5,PC300-6, PC310, PC340-6K,PC340, PC350,PC350-6
specially designed for steel industry; popular for use on roll necks;
The bottom valve,also known as the reverse stop valve, is a low-pressure plate valve, whose function is to ensure the single flow of liquid in the suction pipe, so that the pump works normally when the pump stops working for a short time, so that the liquid can not return to the water tank, and the suction pipe is filled with liquid to facilitate the start of the pump.
06032-01021bearings are used in the Cylindrical Roller Gearbox Bearing system of KOMATSU heavy machinery equipment: 06032-01021 BEARING KOMATSU parts D155A, D155S, D155W, D355A, D355C, D455A, HD320, WS23S
The 4 ton mini forklift truck produced by China's hifoune forklift truck suppliers adopts relatively advanced international technology and independently developed a new series of hifoune forklift internal combustion counterbalanced forklifts based on the original products. Our factory has also applied for the only independent brand of UNITCM.
VOE14608104 bearings are used in the final drive Bearing system of VOLVO heavy machinery equipment: VOE14608104 BEARING Volvo parts EC380E, EC480D, EC480E, EC480EHR
Custom machined epoxy/fiberglass sheets. Free samples for laminate sheets. CNC cutting for the customized sizes. Available Materials include FR4 / G10 / G11 / FR5 /3240 / GPO-3 / Phenolic. Common thickness 0.1-100mm. Stable processing quality,high precision complex parts.
FEIDA Cast Steel Swing Check Valve can be designed according to BS 1868 and API 6D.