Komatsu Excavator PC100-3 bucket Cylinder Seal Kit 707-98-36110

Thisconcentricbutterfly valve is a lug type valve with threaded holes and can be used for many applications. The valve can be used as a stopper, a tap for discharging at the end of the pipeline, open/close and flow control.

The single-disc check valve, made of CF8, has excellent resistance to corrosion. Designed in accordance with API594, the valve is of a WAFER type.

working under the toughest working environment;

allowing greater radial load; carrying high capacity;

High quality steel using; experienced designers' team; mold testing before shipment

professional manufacturer of bearings for steel mills of billets, bars, sections, angles, beams, wire rods, coils, etc. P6 precision for higher wear-resistance best bearing steel to ensure the bearing can work under highest loads

four-row cylindrical roller bearings for steel industry working under the toughest working environment able to work under high temperature, water, particles one-stop rolling mill solution to reduce rolling mill’s cost ready stock delivered within 7days OEM service

working under the toughest working environment; reducing your rolling mill cost;

Bearing number : 6002rs with 2PCS Material : nylon + chrome steel Gcr15 Color : Black Size : 15*70*35mm Application:barn door

JAPAN origibal brand NSK 6209 deep groove ball bearing 6209DDU 6209DU 6209ZZ 6209ZZCM with size 45*85*19mm are widely use for motorcycle.

DN50 PN160 floating ball valve is made according to API6D standard. The valve body is made of A105. It has the structural characteristics of floating ball and structural length of 235mm. It has a lever operation mode and its connection mode is lens gasket.

China 1 Inch Gate, Valve Manufacturer Dervos Provides 1 Inch Gate Valve, A105, API 600, Class 600, Flanged, Handwheel Operation.

Our company is committed to the 'one-stop procurement' service of custom plastic injection molding, control panel control plastic, mobility device plastic. If you want to have a good partner for your automotive plastic injection mold , please contact us freely.

NTN 6204 deep groove ball bearing with size 20 mm ID x 47 mm OD x 14 mm, with double red seals. 6204 bearing have a groove on the outside and the inside of the bearing. It is inseparable and it mainly take radial load as well as take moderate axial load. With less coefficient of friction, high limiting speed and large size range.

higher working performance and low cost to help the steel mills reduce their rolling mill cost;

UCP205-16 with inner standard size 1 inch ,the bearing unit are produced with Chrome steel Gcr15 and cast iron housing and locked by setscrew.

Automatic and operator friendly; Life time service

8" 2500LB ball valve is made according to API 6D standard. The valve body is made of F51. It has the structural characteristics of trunnion mounted ball, full bore. It also has the design of anti-fire, anti-static and anti-flying valve stem. In addition, it also meets NACE MR0175 requirements.