Shandong Guanxian fenqi Bearing Co., Ltd. (registered trademark FQN), is a professional manufacturer of mounted ball bearing UCP, UCF, UCFL, UCFC, UCFB, UCPA, UCFA, UCFS, UCPH with cast iron housing, and mount bearing unit SUCP, SUCF, SUCFL, SUCH with stainless steel housing, as well as the insert bearing UC, UK, HC, SB, SA types, all the above mentioned we can supply metric and inch size standard, which are produced in strict accordance with the international quality system standard with excellent equipment and perfect detection means.
Tapered roller bearings are separate bearings. Both the inner and outer rings of the bearing have tapered raceways. This type of bearing is divided into single, double and four-row tapered roller bearings according to the number of rollers installed. Single-row tapered roller bearings can support radial loads and axial loads in one direction. When the bearing is subjected to a radial load, an axial component will be generated, so when another bearing that can bear the axial force in the opposite direction is needed to be balanced.
Tapered roller bearings refer to radial thrust rolling bearings in which the rolling elements are tapered rollers. There are two kinds of small cone angle and large cone angle. The small cone angle mainly bears the combined radial and axial loads mainly with radial loads. It is often used in pairs and installed in reverse.
The radial and axial clearance can be adjusted during installation and use; The large cone angle mainly bears the axial and radial combined loads, which are mainly axial loads. Generally, it is not used alone to support pure axial loads. When configured in pairs (installed with the same name opposite).
The radial and axial clearance can be adjusted during installation and use; The large cone angle mainly bears the axial and radial combined loads, which are mainly axial loads. Generally, it is not used alone to support pure axial loads. When configured in pairs (installed with the same name opposite)
The basic dimensions of FQN tapered roller bearings are listed in the dimensional data sheet, Single-row tapered roller bearings: Inner diameter size range: 20mm～1270mm Outer diameter range: 40mm～1465mm Width size range: 15mm～240mm
This type of bearing is divided into single, double and four-row tapered roller bearings according to the number of rollers installed.
Thin section Tapered roller bearings 32904 are separate bearings. inner diameter is 20mm, outer dimater is 37mm,width is 12mm.
The basic dimensions of FQN tapered roller bearings are listed in the dimensional data sheet, Single-row tapered roller bearings: Inner diameter size range: 20mm～1270mm Outer diameter range: 40mm～1465mm Width size range: 15mm～240mm
The basic dimensions of FQN tapered roller bearings are listed in the dimensional data sheet, Single-row tapered roller bearings: Inner diameter size range: 20mm～1270mm Outer diameter range: 40mm～1465mm Width size range: 15mm～240mm
Subscribe to our weekly newsletter and receive exclusive offers on products you love!
X
