> Card type: EM Card
> Capacity: 2000 users
> Working Voltage: DC12-24V
> Card Reading Distance: 1~3cm
> Dimension: 114x75x16mm
Keypad Access Control
Model No.: K12 EM
The device is a standalone access control and proximity card reader which supports EM & MF card types. It builds-in STC microprocessor, with strong anti-interference ability, high security and reliability, powerful function, and convenient operation. It’s widely used in high-end buildings, residential communities, and other public places.
Features:
Ultra-low Power | Standby current is less than 30mA |
Wiegand Interface | WG26 or WG34 input and output |
Searching time | Less than 0.1s after reading card |
Backlight keypad | Operate easily at night |
Doorbell interface | Support external wired doorbell |
Access ways | Card, Pin code, Card & Pin code |
Independent codes | Use codes without related card |
Change codes | Users can change codes by themselves |
Delete users by card No. | The lost card can be deleted by keyboard |
Specifications:
Working Voltage | DC12-24V |
Capacity | 2000 users |
Card Reading Distance | 1~3cm |
Standby Current | ≤30mA |
Door Relay time | 0~99S(Adjustable) |
Working Temperature | -40℃~60℃ |
Working Humidity | 10%~90% |
Dimension | 114x75x16mm |
Installation:
Drill hole according to the size of the device and fix the back shell with the equipped screw. Thread the cable through the cable hole. connect the wires according to your required function, and wrap the unused wires to avoid short circuit. After connecting the wire, install the machine. (as shown below)
Wiring:
Colour | ID | Description |
Green | D0 | Wiegand Input(Wiegand Output in Card Reader Mode) |
White | D1 | Wiegand Input(Wiegand Output in Card Reader Mode) |
Yellow | OPEN | Exit Button input terminal |
Red | +12V | 12V + DC Regulated Power Input |
Black | GND | 12V - DC Regulated Power Input |
Blue | NO | Relay normally-on terminal |
Purple | COM | Relay Public terminal |
Orange | NC | Relay normally-off terminal |
Pink | BELL_A | Doorbell button one terminal |
Pink | BELL_B | Doorbell button to the other terminal |