1.Anti-Corrosion. 2.Dual/four wire compartment. 3.Available for thickness of module frame from 1.0 to 3.2mm. 4.Available sizes for 4.0mm, 5.0mm and 6.0mm cables. 5.Prevent damage to cable insulation.

YRK Hanger bolts with stainless steel adapter plate are suitable for corrugated fibre cement coverings with a wooden substructure and they are equipped with an extra-long metric thread for installation height adjustment.

Our adjustable solar end clamp made of high-quality aluminum material, stable and wear-resistant, corrosion-resistant, good gloss, compact structure, the surface is produced by fine manufacturing process, not easy to rust or corrode, and lasts longer.

1.The solar rails are large,high strength,span can be enlarged. 2.High corrosion resistance,salt tolerance.

1.Regular solar rail is widely used. 2.High corrosion resistance,salt tolerance. 3.Lightweight,easy transportation and installation,safe construction.

Features: • Al6005-T5 • Easy application for most of the roofs • Cost efficiency design

Flexible fixing method, can be placed on the balcony with railing or wall. Highly anti-corrosion 6005-T5 aluminum alloy and robust 304 stainless steel.

Adapt to multiple scenarios: garden, balcony, railing, walls and etc.

This multifunctional solar panel triangle bracket has a wide range of uses, suitable for balcony railings, garden railings, street railings and other railings or some suitable for hanging or fixed wall.

The universal easy solar bracket, developed for achieving good combination with solar kit, which can be installed at flat ground or roof, raillings, balcony and garden. It’s much flexible with adjustable tilt range between 30°~50° to get more energy.

1. Material:Aluminum. 2. Adjustable hook and suitable for pitched roof mounting. 3.For our tile roof hooks, we offer 10 years warranty. 4. Accommodate different types of flat tile roofs. 5. Angle of inclination5-75 °. 6. Hook width35 mm.

As one of the series products of photovoltaic plant engineering construction, Ground screw is a new type of foundation. It simplifies the project planning and implementation. Compared with traditional concrete foundation, it is safer, faster and more cost-effective. During the installation process, the ground screw has no construction interference that affects the surrounding environment, and can be easily removed without generating environmental waste.

Material:Anodized aluminum. Applicable Module:Framed or framless. Wind Load:up to 60m/s. Snow Load:up to 1.4KN/m2. Strength: Factory direct slaes with high quality, faster delivery and satety package.

The Z-shaped bracket installation kit is applicable to the installation of solar photovoltaic brackets for RV and yacht, as well as the installation of solar modules of different specifications such as traffic lights, warning lights, indicator lights and standby power supply for safety lighting. The Z-type photovoltaic aluminum support installation kit consists of four Z-type aluminum supports and supporting fasteners. The product is made of high-quality aluminum alloy, with convenient installation and wide application fields.

Hanger bolt applies to install on both wooden rafter and steel purlin. Both types can be applied with L feet or adapter plates.

Hex bolts (six sided heads) are the industry standard for fasteners with forged heads. The most popular standard is DIN933 with full thread. If you want half thread, it is DIN931 Standard. For specifications such as A307 grade B, A325 and A490 that require a heavy hex pattern, refer to dimensional tolerances for heavy hex bolts or structural bolts.

Adjustable and folding Triangle solar panel tilt mount are ideally designed for off-grid solar system, which have been widely used on Boat, RV, Marine, Motorhome, caravan, sheds, garages or other flat surface. It could be assembled quickly with stainless steel fasteners and pre-drilled holes.

No drilling is required, as long as it is bonded with sealant (not included). If you want more stability, you can drill holes in the prepared holes on the side and fix solar panel mounting bracket with screws (not included).

Max Wind Speed:up to 60m/s. Snow Load:Up to 1.4KN/m2. Material:Aluminum 60005 & Stainless Steel 304. Packing:packed in pallet, carton box or as your request.or customer required.

1. Easy and fast to install, 2. It made of stainless steel SUS 304 Material