Smart Slitting Line Machine/Smart Coil Slitter Roll Former /Steel Coil Slitting Line Roll Forming Machine is used to let the steel coil to uncoiler, section shear and recoiler.
Smart Slitting Line Machine/Smart Coil Slitter Roll Former /Steel Coil Slitting Line Roll Forming Machine:
The coil change in to some separate coils, which have the requirement length. This line is fit to machining cold carbon roll steel and hot carbon roll steel, tin, stainless steel and many metal plated coils.
The production line including uncoiler car, uncoiler, leveler, section shear, waste coil recoiler, pinch machine, recoiler, unloading set, etc.
Whole line is controlled by PLC, human and machine screen display, high automatic degree, control simple and convenient operation.
The production line specification:
Material: Max. Coil Width 1250mm; Thickness Range: 0.2-1.0mm
Slitting accuracy≤0.5mm
Galvanized steel, Cold rolled steel, PPGI steel
Slitting/Recoiling speed: Approx. 15mpm
●5TonX1250 Hydraulic Un-coiler:
Hydraulic system expand coil inner hole, Pump motor: 3KW
Frequency Inverter to regulate turning speed, Motor: 3KW
Taper-wedge expanding system
Load capacity = Max.5Tons
Coil Inner-diameter=510±30 mm, Coil width = Max.1250mm
Automatic stopping device with limited switch as assistance to control stop/star rotation
●Simple Slitting/shearing machine,one unit
Equipped with independent electric control cabinet
Powered feed-in stations, driven motor: 4KW, Frequency speed control
Manual adjustment to control the slitting speed
Total four pairs of slitting tools, Max slitting 5 trips at one time
Slitting blade material Cr12, Heat treatment
Slitting width: Min. 70mm
One more pair of slitting tools to be used as spare part
Working parameters:0.2mm≤δ≤1.0mm,S=1250m
1.0*1300mm electric shearing machine, cut-to-length control, Power 1.5KW
5●5T*1250mm hydraulic re-coiler with coil car:
Equipped with independent electric control cabinet
Strip separator and tension unit
Separating slit strips so that they don’t interfere with each other. The tension unit is there to provide tension for recoiling.
Pneumatic cylinder to press, with compartment wheel
Attention: Air resource provide by the buyer.
Hydraulic system to expand coil inner hole, Pump motor: 3.0KW
Coil Inner-diameter= 508~610mm. Coil Outer-diameter Max. 1300mm
Load Capacity: Max. 5Tons, Coil Width Max.1250mm
Taper wedge expand system
There is a separated device to hold the head of the sheet when re-coiling start, and then become loosen when un-load the coil from the re-coiler.
Retarding motor for re-coiling, Motor:7.5KW with automatic rotation speed control for re-coiling
Coil car for easy un-loading the separated coils
Up/Down stroke of Coil Car: Max. 450mm
Forward/backward stroke of Coil Car: Max. 2000mm