SC500 fixed wireless terminals are CDMA2000 1X products brought to you by SUNCOMM. Based on IS-2000 series protocol, SC500 is compatible with IS-95 network environment. SC500fixed wireless phoneworks at 450MHz and provides Voice, Data service, SMS function.
Frequency: 450MHz
Remark: Support Data Function
SIM card CDMA fixed wireless desktop phone
Based on SUNCOMM’s 15 years’ experiences in developing professional communication products, SC500 aims at telecom-level communication equipment standards, and provides users with higher reliability and quality to better meet users’ requirements.
Appearance and Structure:
Item |
WP560CD |
Remark |
Dimensions |
206mm×167mm×74mm |
Put antenna horizontal |
Weight |
350g |
Including battery |
Lifespan of keys |
0.5 million cycles |
|
Material |
ABS |
|
Display |
128 × 64dots LCD, with backlight |
|
Power input |
DC 12V |
|
Data interface |
USB A Type |
|
Handset interface |
616E, 4-pin |
|
Functions:
4.1Voice Function |
||
Item |
Description |
Remark |
Voice |
Voice call origination |
|
Voice call termination |
|
|
Emergency call |
|
|
Hotline mode |
|
|
CNIP |
|
|
Redial |
|
|
Delay dial |
|
|
Hands-free talk |
|
|
Mute |
MIC or Ring |
|
Phone book |
100 records |
|
Incoming call history |
25 records |
|
Missed call history |
25 records |
|
Outgoing call history |
25 records |
|
Outgoing Call restriction |
|
|
Incoming Call restriction |
|
|
Call forwarding |
System support required |
|
Three-way call |
System support required |
|
Call waiting |
System support required |
|
Sound |
Ringtone optional, volume adjustable |
|
Key tone volume adjustable |
|
|
Handset volume adjustable |
|
|
Handsfree volume adjustable |
|
|
Low battery alert |
|
|
New message alert |
|
|
Display Function |
||
Item |
Description |
Remark |
Display |
Power on/off animation |
|
Signal strength indication |
|
|
Battery power indication |
|
|
Charging indication |
|
|
Call duration display |
|
|
Short message indication |
|
|
Time and date display |
|
|
Alarm clock indication |
|
|
SMS Function |
||
Item |
Description |
Remark |
SMS |
Sending/receiving messages |
|
Sending messages to multiple recipients |
Max.10 |
|
Message reply or callback |
|
|
Message storage |
Can save 70 messages, 20 sent messages and 50 received messages |
|
Data Function |
||
Item |
Description |
|
High speed Internet access |
Up to 153.6kbps data rate |
|
Async data service |
14.4kbps |
|
Other Function |
||
Item |
Description |
Remark |
Alarm clock |
Once alarm, daily alarm or weekdays alarm |
|
MP3 |
Support MP3 |
Support setting as ringtongs |
Calculator |
Standard calculator |
|
Stop Watch |
|
|
Scheduler |
|
|
R-UIM function |
R-UIM or Built-in UIM |
|
FM |
Optional |
|
UTK |
Support UTK |
System support required |
Communication Protocols and Technical Parameters |
|
Item |
Description |
Access mode |
CDMA |
CDMA protocol |
IS-95A/B,IS-98A,IS-126,IS-637A,IS683,IS-707A,IS-2000 |
Interval between transmitting and receiving frequency |
10MHz |
Voice code |
EVRC,13k QCELP |
RF Receiving |
|
Item |
Description |
Frequency range |
Block A: 462.5 MHz ~467.475MHz |
Block B: 462.0 MHz ~466.475MHz |
|
Block C: 460 MHz ~454.8MHz |
|
System designator: A |
Valid CDMA channel number range: 146-275 |
Preferred set channel numbers: 160,210,260 |
|
System designator: B |
Valid CDMA channel number range: 106-235; |
Preferred set channel numbers: 120,170,220 |
|
System designator: C |
Valid CDMA channel number range: 26-168; |
Preferred set channel numbers: 47,97,147 |
|
RX sensitivity |
-104dBm (FER≤0.5%) |
Range of receiving signal |
-25dBm ~ -104dBm (FER≤0.5%) |
Single-tone interference resistance |
FER≤1.0% (-101dBm/BW, -30dBm@) |
Two-tone intermodulation spurious |
FER≤1.0% (TEST1: -101dBm/BW, +900/+1700KHz, -43dBm) |
FER≤1.0% (TEST2: -101dBm/BW, -900/-1700KHz, -43dBm) |
|
Conductive spurious emission |
<-76dBm/1MHz (462.5 MHz ~467.475MHz) |
<-61dBm/1MHz (452.5 MHz ~ 457.475MHz) |
|
<-47dBm/30KHz (Other frequencies) |
|
Demodulation of forward channel under additive white gaussian noise |
FER≤3.0% (Test 1: Rate Group 1(9600bps) |
FER≤1.0% (Test 2: Rate Group 1(9600bps) |
|
FER≤0.5% (Test 3: Rate Group 1(9600bps) |
|
FER≤1.0% (Test4: Rate Group 1(4800bps) |
|
FER≤1.0% (Test5: Rate Group 1(2400bps) |
|
FER≤1.0% (Test6: Rate Group 1(1200bps) |
|
FER≤3.0% (Test7: Rate Group 2(14400bps) |
|
FER≤1.0% (Test 8: Rate Group 2(14400bps) |
|
FER≤0.5% (Test 9: Rate Group 2(14400bps) |
|
FER≤1.0% (Test 10: Rate Group 2(7200bps) |
|
FER≤1.0% (Test 11: Rate Group 2(3600bps) |
|
FER≤1.0% (Test 12: Rate Group 2(1800bps) |
|
RF Transmitting |
|
Item |
Description |
Frequency range |
Block A: 452.5 MHz ~457.475MHz |
Block B: 452.0MHz~456.475MHz |
|
Block C: 450 MHz ~454.8MHz |
|
System designator: A |
Valid CDMA channel number range: 146-275 |
Preferred set channel numbers: 160,210,260 |
|
System designator: B |
Valid CDMA channel number range: 106-235; |
Preferred set channel numbers: 120,170,220 |
|
System designator: C |
Valid CDMA channel number range: 26-168; |
Preferred set channel numbers: 47,97,147 |
|
Max. frequency deviation |
±300Hz |
Rated power |
24.7dBm |
Max. power |
23dBm ~ 30dBm@-104dBm |
Min. output power |
< -50dBm@-25dBm |
Standby output power |
<-61dBm |
Code domain power |
The code domain power of each unactivated sub-channel is at least 23dB lower than the total output power measured at I- and Q- channel. |
TX timing error |
1.0μs |
Wave form quality factor |
>0.944 |
TX phase error |
0.00 ~ 90.00deg |
TX amplitude error |
0.00 ~ 100.00% |
Open loop power |
(Test 1: -25dBm/1.23MHz)-48dBm/1.23MHz±9.5dBm |
(Test 2: -65dBm/1.23MHz)-8dBm/1.23MHz±9.5dBm |
|
(Test 3: -93.5dBm/1.23MHz)20dBm/1.23MHz±9.5dBm |
|
Closed loop power |
±24dB (9600bps data rate) |
±24dB (4800bps data rate) |
|
±24dB (2400bps data rate) |
|
±24dB (1200bps data rate) |
|
Conductive spurious emission |
-42dBc/30KHz or -54dBm/1.23MHz (|Δf|: 885KHz~1.98MHz) |
-54dBc/30KHz or -54dBm/1.23MHz (|Δf|: 1.98MHz~4.00MHz) |
|
<-36dBm/1kHz (|Δf| > 4MHz, 9KHz < f < 150KHz,) |
|
<-36dBm/10kHz (|Δf| > 4MHz, 150kHz<f<30MHz,) |
|
<-36dBm/100kHz (|Δf| > 4MHz, 30MHz<f<1GHz) |
|
<-30dBm/1MHz (|Δf| > 4MHz, 1GHz<f<12.75GHz) |
|
Antenna |
|
Item |
Description |
Frequency bandwidth |
TX: 450 MHz ~460MHz |
RX: 460 MHz ~470MHz |
|
Gain |
2dBi |
Input resistance |
50Ω |
Polarization form |
Vertical polarization |
Power Consumption |
||
Item |
Spec. |
Remark |
Max. power consumption |
2.8W |
|
Typical power consumption during talk |
1.0W |
Signal strength is -80dBm |
Power consumption in idle mode |
0.04W |
Signal strength is -80dBm |
Power Supply |
|||
State |
Max. voltage |
Typical voltage |
Min. voltage |
Power supply by adapter |
DC 12.6V |
DC 12.0V |
DC 11.4V |
Power supply by battery |
DC 4.2V |
DC 3.7V |
DC 3.3V |
Working Condition |
|
Working temperature: |
-10 ~ + 55℃。 |
Storage temperature: |
- 20 ~ + 70℃。 |
Humidity: |
≤95% |
Accessories:
Power Adapter |
||
Item |
Technical Spec. |
|
Type |
Linear power supply |
|
Input |
Voltage |
220VAC±20% |
Frequency |
50~60Hz |
|
Max. input current |
85mA |
|
Efficiency |
>55% ( on the condition of 220VAC±20% input and full-load output) |
|
Output |
Voltage |
DC 12V |
Max. current |
500mA |
|
Size (L x W x H) |
79mm*54mm*43mm |
|
Weight |
328g |
|
Input plug |
Can be customized |
|
Length of power cord |
1500mm |
|
Safety certification: |
||
The power adapter should be as the international standards |
||
Battery |
||
Item |
Technical Spec. |
Remark |
Type |
Li |
|
Capacity |
1000mAh/2000mAh |
|
Voltage |
Typical value is 3.7V |
|
Talk time |
180~300min./120-240min |
Determined by signal strength |
Standby time |
50~100hr/40-80hr |
Determined by signal strength |
Charging time |
4hr. |
|
450M Outdoor Antenna (optional) |
||
Item |
Technical Spec. |
|
Frequency bandwidth |
400~480MHz |
|
Gain |
5~11dBi (Regardless of feeder loss) |
|
Lobe width horizontal |
32 |
|
Lobe width vertical |
20 |
|
Polarization form: |
Vertical polarization |
|
Max. input power |
100w |
|
Front-back ratio |
>18dB |
|
Connector |
TNC-Male |
|
Lighting protection |
GND protection |
|
Length |
Standard configure 15m |
|
Anti-wind strength |
60m/s |
Products display:
Get to know us quickly:
Custom fixed wireless phone is available, OEM & ODM is accepted. Let us meet your requirements, call today.