This type of bearing is divided into single, double and four-row tapered roller bearings according to the number of rollers installed.

Thin section Tapered roller bearings 32904 are separate bearings. inner diameter is 20mm, outer dimater is 37mm,width is 12mm.

The basic dimensions of FQN tapered roller bearings are listed in the dimensional data sheet, Single-row tapered roller bearings: Inner diameter size range: 20mm～1270mm Outer diameter range: 40mm～1465mm Width size range: 15mm～240mm

The basic dimensions of FQN tapered roller bearings are listed in the dimensional data sheet, Single-row tapered roller bearings: Inner diameter size range: 20mm～1270mm Outer diameter range: 40mm～1465mm Width size range: 15mm～240mm

Deep groove ball bearings were originally listed as radial ball bearings, which are the most widely used rolling bearings. It is characterized by low friction resistance and high speed.

Deep groove ball bearings were originally listed as radial ball bearings, which are the most widely used rolling bearings. It is characterized by low friction resistance and high speed.

Deep groove ball bearings were originally listed as radial ball bearings, which are the most widely used rolling bearings. It is characterized by low friction resistance and high speed.

Deep groove ball bearings were originally listed as radial ball bearings, which are the most widely used rolling bearings. It is characterized by low friction resistance and high speed.

6004,6004-2RS,6004-2Z Deep groove ball bearings are mainly used to support radial loads, but they are also commonly used to support combined radial and axial loads.

6005,6005-2RS,6005-2Z Deep groove ball bearings are mainly used to support radial loads, we have 30,000pcs in stock any time.

All above mentioned bearing size in the list we can manufacturer open, ZZ and 2RS design.

The axial deep groove ball bearing consists of an outer ring, an inner ring, a set of steel balls and a set of cages. There are two types of deep groove ball bearings: single-row and double-row.

The basic deep groove ball bearing consists of an outer ring, an inner ring, a set of steel balls and a set of cages. There are two types of deep groove ball bearings: single-row and double-row.

UCT Standard duty,Wider inner ring bearing,Setscrew locking,Cast gray iron housing . Cast DUCTILE iron housing available upon request.

Insert ball bearings are preferred for applications requiring simple equipment and components, such as agricultural machinery, transportation systems, or construction machinery.

The code of Insert ball bearing with set screw is uc200 series (light series), uc300 series (heavy series) and UB (sb) 200 series. If the application environment is small, uc200 series is usually selected on the applications,, otherwise uc300 series is selected. Generally, there are two jackscrews on the spherical surface ball bearing, with an included angle of 120 °. The characteristic is that the jackscrew is used to Jack the shaft when cooperating with the shaft, and then it has a fixed effect. However, the cooperation environment needs to have a small oscillation scale.

The code of Insert ball bearing with set screw is uc200 series (light series), uc300 series (heavy series) and UB (sb) 200 series. If the application environment is small, uc200 series is usually selected on the applications,, otherwise uc300 series is selected. Generally, there are two jackscrews on the spherical surface ball bearing, with an included angle of 120 °.

Although its basic performance is similar to that of deep groove ball bearing, most of the bearings are used in relatively rough machinery, the installation and positioning are not accurate enough, the axis of the shaft and the seat hole is neutral, or the shaft is long and the deflection is large, and the accuracy of the bearing itself is not high enough, and some structures are relatively rough, so the actual performance of the bearing is relatively the same specification Deep groove ball bearings are subject to considerable discount.

The insert ball bearing is a variant of the deep groove ball bearing. the outer diameter surface of the outer ring is spherical, which can be fitted into the corresponding concave spherical surface of the bearing housing to play the role of centering. The insert ball bearing is mainly used to bear the combined radial and axial load, which is mainly the radial load. Generally, it is not suitable to bear the axial load alone

Flange Cartridge Bearing Units, UCFC Standard duty, Wider inner ring bearing,Setscrew locking, Cast gray iron housing