Signal Output: door open or door close state detectionwith output point, NC/COM
> Built in LED, door sensor and time delay> Single door 350KG=800lbs> Voltage: DC12V and DC24V(adjustable)> Holding Force: 380KG(800Lbs)> Current Draw: 12V/500mA 24V/250mA
> Fingerprint Capacity: 500> User Capacity: 2500> LCD: 1.7 inches TFT colour screen> Work with 4pcs 1.5V “AA” alkaline battery> Fingerprint Sensor: SemiconductorSupport: Fingerprint+EM 125KHz Card+Pincode
> Display: 2.8 inches> Face Capacity: 1000> Communication: USB, R485, TCP/IP, (Optional WIFI)> Dimension: 200x90x31mm
> Card type: EM Card > Keypad Characteristic: Infrared remote controller operation. > Admin Card: Add and Delete cards > User Capacity: 10,000 card users, 1000 facial users
Door position detection and bolt position (N.C. & N.O.)output points> Power Supply: DC12V> Operation current: 880mA
> Frequency: ISM 902~928MHz or 860~870MHz> Protocol: ISO18000-6B, ISO18000-6C (EPC GEN2)> Size: 243x22x10mm
> Without door position detection output> Voltage: DC12V or DC24V> Holding Force: 180kg(350Lbs)> Current Draw: 12V/480mA 24V/240mA
> Dimension: 55x40.2x19.1mm> Voltage: DC12V> Current: 40mA> Time: 0~30S
Work with ACB-R01, ACB-R02, ACB-R04 control board only
> Card type: EM, HID, MF, CPU Card (Factory default: EM 125KHz) > Metal backlight keypad > User capacity: 10,000 users > Dimensions: 152x60x24mm > Waterproof IP68
Water-resistant, ABS plastic material, 125KHz. EM card.> Check sport type: RFID> Working frequency: 125KHz. EM> Battery: None, passive tag> Size: 70x70x10mm
Work with all Kind of Single & Double Smokeproof Doors> Dimensions: 50x65x90mm> Holding Force: 60kg(110Lbs)
> Wire diameter: 13mm> Door loop length: 470mm> Inner Diameter: Support 4pcs 6mm cat6 wires
> Card type: EM Card> Full programming from the keypad> WG26 Input/output> 2000 uses, supports Card, PIN, Card + PIN> Digital backlit keypad> Red, Yellow, and Green LEDs display the working status
> Card type: EM or MF Card> Metal case, anti-vandal> WG26 Input/output> Three accesses: card, pin, card+pin> Digital backlit keypad> Doorbell support and interface: button and circuit segregate, any doorbell can be connected