♦Rechargeable battery can work up to 14 hours ,it is suitable for pipe sizes ranging from 40 to 4000mm ♦For dirty liquids, a certain amount of air bubbles or suspended solids shall be contained ♦Excellent low flow rate measurement ability, low to 0.05m/s and user-friendly configuration ♦A wide range of flow measurement, high flow rate can reach 12m/s and high-temperature transducer is suitable to liquids of -35℃ ~ 200℃ ♦Accuracy: 2.0% Calibrated span and do not need to shut down the pipe flow when installing the transducers ♦4-20mA, Relay Totalizer and Relay Alarm outputs

♦It is suitable for pipe sizes ranging from 40 to 4000mm ♦For dirty liquids, a certain amount of air bubbles or suspended solids shall be contained ♦Excellent low flow rate measurement ability, low to 0.05m/s ♦A wide range of flow measurement, high flow rate can reach 12m/s ♦High-temperature transducer is suitable to liquids of -35℃ ~ 200℃ ♦Do not need to shut down the pipe flow when installing the transducers ♦User-friendly configuration ♦4-20mA, Relay Totalizer and Relay Alarm outputs ♦Accuracy: 2.0% Calibrated span

♦Rechargeable battery can work up to 50 hours ♦It is suitable for pipe sizes ranging from 40 to 4000mm ♦For dirty liquids, a certain amount of air bubbles or suspended solids shall be contained ♦Excellent low flow rate measurement ability, low to 0.05m/s ♦A wide range of flow measurement, high flow rate can reach 12m/s ♦High-temperature transducer is suitable to liquids of -35℃ ~ 200℃ ♦Do not need to shut down the pipe flow when installing the transducers ♦User-friendly configuration ♦4-20mA, Relay Totalizer and Relay Alarm outputs ♦Accuracy: 2.0% Calibrated span

♦It is suitable for pipe sizes ranging from 65 to 4000mm ♦ For dirty liquids, a certain amount of air bubbles or suspended solids shall be contained ♦ Excellent low flow rate measurement ability, low to 0.05m/s ♦ A wide range of flow measurement, high flow rate can reach 12m/s ♦ High-temperature transducer is suitable to liquids of -35℃ ~ 150℃ ♦ Do not need to shut down the pipe flow when installing the transducers ♦ User-friendly configuration ♦ 4-20mA, Relay Totalizer and Relay Alarm outputs ♦ Accuracy: 2.0% Calibrated span

♦ 20 coordinate points to describe the river’s shape of cross section. ♦One instrument can measure the velocity, depth and conductivity at same time. ♦Velocity Range : 0.02mm/s to 10m/s bi-directional, accuracy is 1%. ♦Depth Range: 0 to 10m ♦Measure velocity in both forward flow and back flow. ♦ Depth is measured by both the pressure sensor and ultrasonic level sensor principles. ♦ With coordinate correction and pressure compensation function. ♦IP68 Epoxy-sealed body design, long time under water. ♦ RS485/MODBUS output, can contact computer directly.

♦Multiple functions, with calculating、control、transmitting and other functions. ♦Match with various weir tank. Right-angle triangle weir、rectangular weir、groove、parshall flume、throat channel slot. ♦Accurate measurement , automatic temperature compensation function, automatic filtering system, strong anti-jamming. ♦Accurate measurement in colder regions with electric heat tracing sensor ♦With IR remote control, easy to operate. ♦ Large screen display, double line 14 bit LCD liquid crystal display (with backlight), characters of the man-machine interface. ♦ With RS485 serial communication, the standard MODBUS RTU protocol, can communicate with Ethernet device, PC, PLC and DCS. ♦Can provide up to 6 relays, can set the upper limit and lower limit alarm and control (instantaneous flow rate and water level), Can be set high, low and fault alarms.

◆ Low starting flow rate, minimum flow rate 1/3 of traditional water meter. ◆ Water temperature detection, low temperature alarm. ◆ No moving part, no wear, long term stable operation. ◆ Above 10 years shelf life. ◆ Installation at any angel, no influence for measurement accuracy. ◆ Ultrasonic signal quality detection. ◆ Photosensitive button, IP 68 design, longtime under water working. ◆ Support optical, RS485 and wired & wireless M-bus communication interfaces. ◆ Complies to MODBUS RTU and EN 13757 communication protocol. ◆ Compile to drinkable water standard requirement.

♦Optional inside 4G or 4G+GPS module♦As client, TCP/IP connect servers (support static IP address or domain) ♦Support MQTT, SCH_IO, http post protocol♦Support connect SCH cloud♦Support sms alarm and control, can setup 5 user phone numbers

♦Adopted highly integrated industrial 32-bit ARM MCU ♦Reliable performance with built-in double watchdog, 24×7 operation ♦With signal filtering mechanisms ♦Network-reconnect and retransmission to ensure data accurately transmit ♦Update RTC automatically or manually, clock source support Sms, NTP, CwtIO Server ♦Can set multiple timers(second, minute, day, week, month) to upload data ♦Provide configure software, visual programming ♦Optional inside battery that life is 8-20 hours, cellular module Intelligent sleep when power los

♦High Performance and Capacity ♦Accommodate up 32 modules and 1024 I/O points ♦2*RJ45 Interface The upper Ethernet interface is used to connect the coupler to the network; the lower socket serves for the optional connection of further PROFIBUS DP devices in the same segment.

♦It has fast speed, quick wiring with pluggable terminals. ♦simple configuration, and is compatible with most CC-Link master stations such as Mitsubishi. ♦The high-speed X-bus supports up to 32 slave stations with a maximum scanning cycle of 1ms. ♦It also has an IP20 protection rating.

♦Robust measurement of analog signals with long-term availability♦Fine scalability of channel density and functional scope♦Universally applicable from mechanical engineering to building control

♦Push-in Technology brings a simple, safe, reliable and efficient installation ♦Close-to-Channel Indicators facilitates the detection and maintenance ♦No Bouncing due to mechanical switches thanks to 3 ms input filter

♦Push-in Technology brings a simple, safe, reliable and efficient installation ♦Close-to-Channel Indicators facilitates the detection and maintenance ♦Max. output current 0.5 A per channel ♦Connection of different load types possible (ohmic, inductive, lamp load)

♦High Performance and Capacity ♦Accommodate up 32 modules and 1024 I/O points ♦2*RJ45 Interface The upper Ethernet interface is used to connect the coupler to the network; the lower socket serves for the optional connection of further EtherCAT devices in the same segment.

♦IP67 I/O module, integrated design ♦EtherCAT fieldbus, 16 DO, PNP ♦Using reinforced plastic material ♦Power interface using M12-L coding, Covering various types of signals ♦Rich indicator light function design

♦IP67 I/O module, integrated design, ♦EtherCAT fieldbus, 16 DO, NPN, ♦Using reinforced plastic material ♦Power interface using M12-L coding ♦Covering various types of signals ♦Rich indicator light function design

♦IP67 I/O, integrated design. ♦CC-Link protocol, 8-channel digital inputs, 8-channel digital outputs. ♦NPN type, housing made of reinforced plastic material, power interface using M12-L coding, rich indicator light function design. ♦Using the CC-Link industrial Ethernet bus interface, it is a CC-Link slave device of the standard IO architecture and can be compatible with CC-Link networks from multiple vendors. ♦It provides users with various options such as high-speed data acquisition, optimized system configuration, simplified on-site wiring and improved system reliability.

♦IP67 I/O module, integrated design. ♦PROFINET fieldbus, 8DI 8DO, NPN. ♦Using reinforced plastic material. ♦Power interface using M12-L coding. ♦Covering various types of signals. ♦Rich indicator light function design.

♦Integrated I/O, CC-Link protocol, 4AO. ♦Signal current: 0~20 mA / 4~20 mA, measurement error: ±0.1%. ♦Size: 102*72*25mm, space-saving, fast speed, fast wiring, pluggable wiring terminals, compatible with Mitsubishi's Q and FX series PLC. ♦Simple configuration, IP20 rated protection.