♦Supports mutual conversion between multiple types of protocols:EtherCAT, PROFINET, EtherNet/IP, CC-Link, PROFIBUS-DP, DeviceNet are arranged in pairs. ♦Supports bidirectional transmission of IO data between the two protocols:The data exchange length supports 256 bytes. ♦ Small size:It has a compact structure and takes up little space. ♦ Easy to diagnose:The innovative channel indicator light design is close to the channel, the channel status is clear at a glance, and detection and maintenance are convenient. ♦ Easy to configure:The configuration is simple and supports mainstream EtherCAT, PROFINET and EtherNet/IP master stations. ♦Easy to install:DIN 35 mm standard rail mounting,Using spring-type terminal blocks and standard RJ45 network interface, wiring is convenient and fast

♦Up to IP67 protection level,Suitable for harsh industrial environments ♦Standardization,Based on IO-Link standard V1.1.3, it can remotely control IO-Link slave devices and is easy to operate. ♦ High compatibility,Supports slave devices with special process data lengths ♦Compact size,Ideal for applications where space is limited ♦Easy to diagnose,Innovative channel indicator light design, close to the channel, the channel status is clear at a glance, easy to detect and maintain ♦Easy to configure,Configuration is simple and supports all major PLCs ♦ Wiring is simple and fast,Simple wiring using standard cables

♦ Up to IP67 protection grade, suitable for harsh industrial environments ♦Wiring is simple and fast, achieving power supply and data transmission at the same time ♦Designed using IO-Link v1.1 specification ♦Can be connected to various IO-Link standard devices and standard switching signals ♦LED status display, channel protection and diagnostics

♦ Up to IP67 protection grade, suitable for harsh industrial environments ♦ Wiring is simple and fast, achieving power supply and data transmission at the same time ♦ Designed using IO-Link v1.1 specification ♦ Can be connected to various IO-Link standard devices and standard switching signals ♦ LED status display, channel protection and diagnostics

♦Simple wiring and quick construction ♦Simple connection and easy maintenance ♦Remote diagnosis is possible, reducing troubleshooting difficulties. ♦Can be adapted to any mainstream solenoid valve and is easy to maintain.

♦A control module integrating valve terminal technology and EtherNet/IP bus technology. ♦It can realize centralized and distributed control, optimize system design, facilitate construction, and simplify debugging, performance testing & diagnostic maintenance of complex systems in the industrial field. ♦The product adopts a modular structure and occupies little space with the addition of pluggable terminals, leading to fast wiring. ♦It has easy configuration and supports most of the mainstream EtherNet/IP master stations, so it can be widely used in industrial control systems.

♦Support CC-Link communication protocol ♦ M12 bus interface, supports cascade communication ♦Supports up to 24-bit dual control solenoid valves ♦Modular structure, small space occupied ♦ Simple wiring, fast construction and convenient maintenance ♦ Supports customization and mainstream solenoid valves, making selection simple and fast ♦Support remote diagnosis and reduce troubleshooting difficulties

♦Integrated I/O, horizontal style, PROFINET protocol, 16DI, 16 DO, NPN. ♦Dimensions: 100*96*35mm, space-saving, fast speed, quick wiring, simple configuration, compatiable with mainstream PLC brands such as Mitsubishi, Beckhoff, Omron, etc.. ♦Simple configuration, protection level IP20.

♦Integrated I/O, Modbus TCP, 4ch AO. ♦Multiple measurement range selections, measurement error 0.1%. ♦102*72*25mm, space-saving, smart. ♦Fast wiring, RTB(Removable Terminal Block), easy configuration, suitable for PLCs of Mitsubishi, Siemens, Omron and other major manufacturers, IP20.

♦Rechargeable battery can work up to 50 hours ♦It is suitable for pipe sizes ranging from 40 to 4000mm ♦For dirty liquids, a certain amount of air bubbles or suspended solids shall be contained ♦Excellent low flow rate measurement ability, low to 0.05m/s ♦A wide range of flow measurement, high flow rate can reach 12m/s ♦High-temperature transducer is suitable to liquids of -35℃ ~ 200℃ ♦Do not need to shut down the pipe flow when installing the transducers ♦User-friendly configuration ♦4-20mA, Relay Totalizer and Relay Alarm outputs ♦Accuracy: 2.0% Calibrated span

♦Optional inside 4G or 4G+GPS module♦As client, TCP/IP connect servers (support static IP address or domain) ♦Support MQTT, SCH_IO, http post protocol♦Support connect SCH cloud♦Support sms alarm and control, can setup 5 user phone numbers

◆ Low starting flow rate, minimum flow rate 1/3 of traditional water meter. ◆ Water temperature detection, low temperature alarm. ◆ No moving part, no wear, long term stable operation. ◆ Above 10 years shelf life. ◆ Installation at any angel, no influence for measurement accuracy. ◆ Ultrasonic signal quality detection. ◆ Photosensitive button, IP 68 design, longtime under water working. ◆ Support optical, RS485 and wired & wireless M-bus communication interfaces. ◆ Complies to MODBUS RTU and EN 13757 communication protocol. ◆ Compile to drinkable water standard requirement.

♦Multiple functions, with calculating、control、transmitting and other functions. ♦Match with various weir tank. Right-angle triangle weir、rectangular weir、groove、parshall flume、throat channel slot. ♦Accurate measurement , automatic temperature compensation function, automatic filtering system, strong anti-jamming. ♦Accurate measurement in colder regions with electric heat tracing sensor ♦With IR remote control, easy to operate. ♦ Large screen display, double line 14 bit LCD liquid crystal display (with backlight), characters of the man-machine interface. ♦ With RS485 serial communication, the standard MODBUS RTU protocol, can communicate with Ethernet device, PC, PLC and DCS. ♦Can provide up to 6 relays, can set the upper limit and lower limit alarm and control (instantaneous flow rate and water level), Can be set high, low and fault alarms.

♦ 20 coordinate points to describe the river’s shape of cross section. ♦One instrument can measure the velocity, depth and conductivity at same time. ♦Velocity Range : 0.02mm/s to 10m/s bi-directional, accuracy is 1%. ♦Depth Range: 0 to 10m ♦Measure velocity in both forward flow and back flow. ♦ Depth is measured by both the pressure sensor and ultrasonic level sensor principles. ♦ With coordinate correction and pressure compensation function. ♦IP68 Epoxy-sealed body design, long time under water. ♦ RS485/MODBUS output, can contact computer directly.

♦It is suitable for pipe sizes ranging from 65 to 4000mm ♦ For dirty liquids, a certain amount of air bubbles or suspended solids shall be contained ♦ Excellent low flow rate measurement ability, low to 0.05m/s ♦ A wide range of flow measurement, high flow rate can reach 12m/s ♦ High-temperature transducer is suitable to liquids of -35℃ ~ 150℃ ♦ Do not need to shut down the pipe flow when installing the transducers ♦ User-friendly configuration ♦ 4-20mA, Relay Totalizer and Relay Alarm outputs ♦ Accuracy: 2.0% Calibrated span

♦Rechargeable battery can work up to 14 hours ,it is suitable for pipe sizes ranging from 40 to 4000mm ♦For dirty liquids, a certain amount of air bubbles or suspended solids shall be contained ♦Excellent low flow rate measurement ability, low to 0.05m/s and user-friendly configuration ♦A wide range of flow measurement, high flow rate can reach 12m/s and high-temperature transducer is suitable to liquids of -35℃ ~ 200℃ ♦Accuracy: 2.0% Calibrated span and do not need to shut down the pipe flow when installing the transducers ♦4-20mA, Relay Totalizer and Relay Alarm outputs

♦Dual channels Insertion transducers to ensure high accuracy 0.5% of the flow meter ♦Hot-tapped installation, no pipe line flow interrupted. ♦No moving parts, no pressure drop, no maintenance. ♦Spool-piece transducer for best accuracy and better long-term stability. ♦High temp. Insertion transducers are suitable for high temperature of -35℃~150℃. ♦Wide bi-directional Flow range of 0.03 to 36 m/s, and wide range of pipe sizes from DN65 to DN6000. ♦Data logger function. ♦The heat measurement function by configuring with paired temperature sensors

♦ Dual channel non-invasive transducers to ensure high accuracy 0.5% of the flow meter. ♦ Easy to install, cost effective, and require no pipe cutting or processing interrupt. ♦ Wide liquid temperature range: -35℃~200℃. ♦ Data logger function. ♦ Aluminum or Stainless steel SUS304 sensors for your optional. ♦ Thermal energy measurement capability can be optional. ♦ For commonly used pipe materials and diameters from 20mm to 6.0m. ♦ Wide bi-directional flow range of 0.01 m/s to 15 m/s

♦Adopted highly integrated industrial 32-bit ARM MCU ♦Reliable performance with built-in double watchdog, 24×7 operation ♦With signal filtering mechanisms ♦Network-reconnect and retransmission to ensure data accurately transmit ♦Update RTC automatically or manually, clock source support Sms, NTP, CwtIO Server ♦Can set multiple timers(second, minute, day, week, month) to upload data ♦Provide configure software, visual programming ♦Optional inside battery that life is 8-20 hours, cellular module Intelligent sleep when power los

♦It is suitable for pipe sizes ranging from 40 to 4000mm ♦For dirty liquids, a certain amount of air bubbles or suspended solids shall be contained ♦Excellent low flow rate measurement ability, low to 0.05m/s ♦A wide range of flow measurement, high flow rate can reach 12m/s ♦High-temperature transducer is suitable to liquids of -35℃ ~ 200℃ ♦Do not need to shut down the pipe flow when installing the transducers ♦User-friendly configuration ♦4-20mA, Relay Totalizer and Relay Alarm outputs ♦Accuracy: 2.0% Calibrated span