Sales

♦3 times overload capacity, bottom cogging torque, response speed

♦Identification of Load Inertia,real-time Automatic Gain Adjustment,Automatic/Manual Notch filter

♦Friction Torque Compensation,built-in Regeneration resistance

♦Input/Output Signal Assigned,electronic Cam Control,gain switch

♦Torque limit change,Interrupt position control,gantrysynchronization control

♦Fully closed-loop control,high flexibilityinternallocation programming mode

Product Detail

SCH-SDE2 cost-effective servo driver

The SDE2 series is a cost-effective servo system (motor & drive), which can be widely used in a large industry, suchas laser marking machine joint robot, linear mechanical hands, wood machinery, glass machinery, injection moldingmachinery, welding and cuting equipment, ceramic equipment, textile equipment, testing equipment, cable equipmentlithium battery equipment, electronic manufacturing equipment, miling machines, grinding machines, CNC lathes, foodproduction lines, packaging production line, engraving and miling machine, engraving machine, high light machinearound line machine, warp knitting machine, labeling machine, veneer machines etc

Technical Specification

ltem		Specifications
Input Power		Single/three phase 220V,three phase 380V
Input Power		Voltage variation range (-15%~+10%)50/60Hz
Cooling Method		Fan cooling
Main Circuit Control Mode		IGBT PWM sine wave mode
Feedback		2500 line(standard)/17 bit
Control Mode		①Position control ②Speed control ③Torque control ④Position/speed mode switch ⑤Position/torque mode switch ⑥Speed/torque mode switch ⑦Positioning operation mode
Position Control	Max input pulse frequency	Line Drive input:Max 500kHz Open Collector Input:Max 200kHz
	Command pulse input mode	①Command pulse/command signal ②Forward rotating pulse and reverse rotating pulse ③A/B phase orthogonal pulse
	Command control mode	①External command pulse input control ②Internal position data control
	Electronic gear	Electronic Gear N/M times (N:1~4194304)/M:1~4194304)
	Torque limitation	Parameter control (Forward rotating and reverse rotating can be set respectively)/ External analog torque control
Speed Control	Analog command input	VREF DCO~±10V
	Speed variation rate	±1r/min or below (load range 0~100%)
	Speed range	1:5000
	Acceleration and deceleration time setting	Acceleration time and deceleration time can be set respectively,and have two groups, and can accelerate and decelerate with S curve
	Speed control mode	External analog input/Internal speed setting
	Torque Limitation	Parameter control (Forward rotating and reverse rotating can be set respectively)/ External analog torque control
Torque Control	Analog command input	TREF DCO~±10V
Torque Control	Torque Limitation	Parameter control/External analog speed limitation
Digital Input/ Outpu	Input	EI1~EI66 lines input,the function can be set freely according to the parameter
	Output	Encoder pulse outputs by frequency division,A/B phase output by line drive and Z phase open collector (Total 3 lines)
	Output	EOUT1~EOUT33 lines output,the function can be set freely according to the parameter
Monitor		Feedback speed,reference speed,reference torque,motor current,feedback of curre- nt location,Location Difference,reference pulse frequency,Feedback Pulse Accumul- ation,Reference Pulse Accumulation,VREF input voltage,TREF input voltage,input terminal signal,output terminal signal etc
Protection(Alarm display)		Overcurrent (oc1,oc2),Over speeding (oS),Overvoltage(Hv),Memory Error (dE),Enc- oder Error(Ec),Overload (oL1,oL2),Main circuit under voltage (Lu),EI Repeat (ctE), Deviation overflow (oF),Servo motor drive overheat (AH)etc
Applica- tion Environ- ment	Site location	Indoors (Avoid direct sunlight),No corrosive gas (Avoid smoke,methane)
	Ambient Temperature	0~50℃(When the ambient temperature is higher than the required one please introduce air circulation)
	Storage Temperature	-20℃~75℃
	Relative humidity	RH 90%lower (No condensation)
	Altitude	Lower than 1000m
	Atmospheric pressure	86~106kPa
	Vibration	≤0.5G