saa rohs approved plastic case 24v led strip power supply 20w led bulb dc power

Sales

The cover material of this 20w 24v led strip power supply is plastic case. It is suitable for dry location and cooling by nature. An universal AC input is 180~ 265VAC.with Nilight LED bulbs can save power to the greatest extent.

Size : 140*45*28mm
Dimming mode : Triac dimmable
Working Mode : Constant Voltage
Output Current : 0.83A
Output Voltage : 24V
Input Voltage : 180-265V
Certification : SAA

Product Detail

saa rohs approved plastic case 24v led strip power supply 20w led bulb dc power

The cover material of this 20w 24v led strip power supply is plastic case. It is suitable for dry location and cooling by nature. An universal AC input is 180~ 265VAC. IP20 is its waterproof rate.

Model		SMT-012-020VT		SMT-024-020VT
Output	DC Voltage	12VDC		24VDC
	Voltage Accuracy	±5%		±5%
	Rated current	1.66Amp	0.83Amp
	Rated power	20W	20W
Input	Voltage Range	180～265VAC
	Frequency Range	50～60HZ
	Power Factor （Typ.）	PF≧0.92/180V ; PF≧0.94/220V ; PF≧0.95/265V
	Full Load Efficiency（Typ.）	>83%	>83%
	AC Current（Typ.）	0.14A/180VAC 0.12 A/220VAC 0.01A/250VAC
	Leakage current	<0.27mA/180VAC; ﹤0.25mA/220VAC
Protection	Short Circuit	Hiccup mode, recovers automatically after fault condition is removed.
	Over voltage	≦270VAC(180~265V)
Environment	Working TEMP.	-40～+60℃
	Working Humidity	20～90%RH,non-condensing
	Storage TEM.,Humidity	-40～+80℃，10～95%RH
	TEMP.coefficient	±0.03%/℃（0～50℃）
	Vibration	10～500Hz，2G 10min./1 cycle，period for 60min. each along X,Y,Z axes
Safety&EMC	Safety standards	EN-60950-1, EN-61347-1/-2/-13
	Withstand voltage	I/P-O/P:3.75KVAC
	Isolation resistance	I/P-O/P：100MΩ/500VDC/25℃/70%RH
	EMC EMISSION	Compliance toEN55015,EN61000-3-2 (≧50%load)
	EMC IMMUNITY	Compliance to EN55015,EN61000-4-2,3,4,5,6,8,11,A light industry level （surge4KV）
Others	Weight	About 0.16Kg/pcs
	Size	1404528mm mmm（LWH）
	packing	324298176mm
	Notes	1. All parameters NOT specially mentioned are measured at 110V/230VAC input , rated load and 25℃of ambient temperature. 2. Ripple& noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor. 3. Tolerance:includes set us tolerance,line regulation and load regulation .
Label