Programmable Temperature and Humidity Chamber E001-150L

Sales

To determine resistance to hot, cold, dry and moisture property for various material. Applicable for products quality management of electronic, electrical appliances, food, vehicles, metals, chemicals, building materials, etc.

Standards : IEC 60068-2-1;
Certificates : CE, ISO 17025
Brand : UTSTESTER

Product Detail

Overview

Programmable Temperature and Humidity Chamber, to determine resistance to hot, cold, dry and moisture property for various material. Applicable for products quality management of electronic, electrical appliances, food, vehicles, metals, chemicals, building materials, etc.

UTS temperature humidity chamber available to be programmed for different temperature and humidity.

Standards

IEC 60068-2-1; IEC 60068-2-38; IEC 60068-2-78; IEC 60068-2-30;

GB/T10589-1989; GB/T10586-1989; GB/T10592-1989; GB2423.3-93(IEC68-2-3)

MIL-STD 810D Method 502.2

GB/T2423.4-93(MIL-STD810)Method 507.2 Procedure 3

GJB150.9-8; GB2423.34-86, MIL-STD883C Method 1004.2

GB/T2423.1-1989 Test A: Low temperature test method

GB/T2423.2-1989 Test B: High temperature test method

Features

Programmable Temperature and Humidity Chamber

Optional Models

Model	E001-80L	E001-100L	E001-150L	E001-225L	E001-408L	E001-800L	E001-1000L
Inner box volume	80L	100L	150L	225L	408L	800L	1000L
Test chamber size (DWH) (cm)	40×40×50	40×50×50	50×50×60	50×60×75	60×80×85	80×100×100	100×100×100
Weight(kg)	180	200	250	300	550	960	1100

Key Specifications

Temperature
The temperature range	-20 ℃ ~ + 150 ℃ / -40℃ ~ + 150 ℃ / -70℃ ~ + 150 ℃
Temperature deviation	≦ ± 2.0 ℃
Temperature fluctuations	± 0.5 ℃
Temperature evenness	≦ 2.0 ℃
cooling rate	Heating rate: - 20 ℃ to + 100 ℃ about 35 min (At no-load state, environmental temperature + 25 ℃) Cooling rate: from + 20 ℃ to - 20 ℃ about 45 min (At no-load state, environmental temperature + 25 ℃)
Humidity
Humidity range	20%R.H～98%R.H
Humidity deviation	±3.0％RH（＞75％RH） ±5.0％RH（≤75％RH）
Humidity uniformity	±3.0％RH (No load)
Humidity fluctuation	±2.0％RH
The temperature and humidity performance test is based on the relevant regulations of IEC 60068-3 standard.The sensor is placed at the outlet of the unit.