12v LED waterproof transformer is designed for a single direct current output voltage. This led power supply 12volt features an IP67 rated waterproof design,Can replace lifud 80W led power supply to install in humid places.
outdoor led driver dimmable single ac to dc 12v LED waterproof transformer
12v LED waterproof transformer is designed for a single direct current output voltage. This led power supply 12volt features an IP67 rated waterproof design, making it suitable for indoor or outdoor use. In addition, they have the certification of CE SAA FCC RoHs and 5 years warranty,has advantages over Itech led power supply in the certificate.
Specifications |
|
|
model |
SMT-012-080VT |
SMT-024-080VT |
|
Output |
DC Voltage |
12V |
24V |
Voltage Accuracy |
±0.5V |
±0.5V |
|
Rated current |
6.66A |
3.33A |
|
Rated power |
80W |
||
Input |
Voltage Range |
100~130V AC/170~265V AC |
|
Frequency Range |
47~63HZ |
||
Power Factor ( Typ.) |
PF≧0.70/110V,PF≧0.70/170V,PF≧0.70/220V,PF≧0.70/265V |
||
Full Load Efficiency(Typ.) |
>84% |
>84% |
|
AC Current(Typ.) |
1.24A/110VAC 0.80A/170VAC 0.62A/220VAC 0.51A/265VAC |
||
Leakage current |
﹤0.25mA/110V/220VAC |
||
Protection |
Short Circuit |
Hiccup mode, recovers automatically after fault condition is removed. |
|
Over voltage |
≦140VAC(90~135V) , ≦270VAC(170~265V) |
||
Environment |
Working TEMP. |
-40~+60℃ |
|
Working Humidity |
20~90%RH,non-condensing |
||
Storage TEM.,Humidity |
-40~+80℃,10~95%RH |
||
TEMP.coefficient |
±0.03%/℃(0~50℃) |
||
Vibration |
10~500Hz,2G 10min./1 cycle,period for 60min.each along X,Y,Z axes |
||
Safety&EMC |
Safety standards |
EN-60950-1, EN61347-1/-2/-13 |
|
Withstand voltage |
I/P-O/P:3.75KVAC |
||
Isolation resistance |
I/P-O/P:100MΩ/500VDC/25℃/70%RH |
||
EMC EMISSION |
Compliance toEN55015,EN61000-3-2 (≧50%load) |
||
EMC IMMUNITY |
Compliance to EN55015; EN61000-4-2,3,4,5,6,8,11,EN61547 Alight industry level (surge4KV) |
||
Others |
Weight |
0.99Kg |
|
Size |
210*68.5*43mm(L*W*H) |
||
packing |
324*298*176mm |
||
Notes |
1. All parameters NOT specially mentioned are measured at 110V/230VAC input , rated load and 25℃of ambient temperature. 2. Ripple& noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor. 3.Tolerance:includes set us tolerance,line regulation and load regulation . |
||
Label |
|
![]() |
![]() |
![]() |
![]() |
Features
No load limitation
PWM out
0-100% dimming range