YS series pre-shredders are designed for processing high strength and tough materials with high levels of contamination. The machine pre-shreds compressed and baled material into fractions for further process. Film type materials are opened up to enable effective cleaning and washing. YS shredders are normally positioned at the front of a film washing system, though the machines can operate as stand-alone units for in-house recycling as well.
Suitable for: Domestic hot water recirculation The Shinhoo pump for domestic hot-water recirculation in single- and two-family houses is suitable for drinking water with a corrosion-resistant pump housing.
The box-type filter press uses filter cloth as the medium for solid-liquid separation. It is a sorting machine suitable for large particle size range. The filter cloth is spread on the surface of the filter plate and is supported by the expansion groove of the filter plate. After the filter plate is clamped, the filter cloth becomes a sealing material. The cavity between each two filter plates forms an independent filter chamber. In the filtration process, the material enters the filter chamber through the center hole, the filtrate flows through the feed pressure, and flows out of the filter plate after confluence. Chamber filter press can be divided into open channel flow and culvert flow according to the way of filtrate. The plate and frame filter press separates solids from liquids in the form of filtration. It is a sorting machine suitable for large particle size range. The material passes through the filter chamber by the filter plate and the filter frame, the material under the pressure of feeding, the filtrate flows through the filter frame-fiber gap between the filter plate and the filter cloth, reaches the model surface, and the filter plate flows out after polymerization. The remaining solids will form a filter cake. The plate and frame filter can be divided into open channel flow and culvert flow according to the way of filtrate.
Cold chamber die casting machines are suitable for die pressed casting of aluminum,zinc,copper,magnesium and other non-ferrous metal.They can make door handles, electric cases, LED light housings and many other products.
Our Products Line include micro-sprinkler system, drip irrigation system, filter system, fertilizer system, garden watering kit, tubing and their fitting etc which are all perfectly manufactured by the advanced technology and good quality materials, widely apply in agricultural irrigation, landscape, family garden, greenhouse and sport course so on.
Light, convenient, low value, easy-use lock ring fitting for drip tape. Made from high quality material, with UV protection and anti-aging, can be used for drip tape with thickness from 0.15mm to 0.4mm.
Ultrasonic plastic welding is suitable for virtually all thermoplastics. When planning welds between semi-crystalline plastic pieces of work, it is important to remember that the weld behaviour of these plastics differs considerably from that of amorphous plastics.
The integration of fuselage and workbench base not only facilitates the installation and transportation of users, but also ensures the stability of the machine.
SD series are our exclusive products which are designed for rice shaping sorting request. Since the price of intact rice is higher than that of the broken rice. Grading rice according to shape could maximize the performance of the sorting result and level up the price.
The amount of clean film and greenhouse film is very large. The one-step extrusion injection molding special equipment developed by us saves the granulation process, uses less people, and our brother has a small area.
EVCO module system equipment can provide customized services for customers;The equipment is compact and easy to operate.Forced circulation prevents pipeline scaling;Steam closed circulation reduces energy consumption, up to 95% energy recycling;The equipment adopts PLC control, intelligent operation;Automatic chemical cleaning makes the operation more smooth;Automatic control of fractions according to customer requirements.
180mm drywall sander with self-suction function. With LED light, special dustproof design, convenient and durable. Designed & Manufactured by KYNKO Power Tools, Quality Guaranteed.
Die casting machine high productivity, to a certain extent can be a multi - hole mold;Die casting mold life long, a pair of die casting mold, die casting alloy, life up to hundreds of thousands of times, even millions of times;Easy to achieve mechanization and automation.
Our Products Line include micro-sprinkler system, drip irrigation system, filter system, fertilizer system, garden watering kit, tubing and their fitting etc which are all perfectly manufactured by the advanced technology and good quality materials, widely apply in agricultural irrigation, landscape, family garden, greenhouse and sport course so on.
Ceramic piston pump is famous for its duplex ceramic pistons reciprocating working to transport slurry.
Subscribe to our weekly newsletter and receive exclusive offers on products you love!
X
