Shop at Easfe for quality fiber optic transceivers suppliers, our supplier focused on development and manufacture for the commercial and industrial grade 400G, 200G, 100G, 50G, 40G, 25G, 10G, 1.25G optical transceiver, and 3G/ 12G for optical transceiver and more.
The products used in IDC data centers, super-computing datacenters, 5G networks(fronthoul, midhaul, backhaul), OTN/PTN, optical network switch,and other environmental applications.
All Compatible Cisco, Huawei, H3C, Brocade, Ubiquit, Mikrotik, Intel, Fortinet, Netgear, D-Link, TP-Link, Broadcom, Zyxel, DELL, ZTE, Ruijie, Mellanox, HPE, aruba ...... Best China supplier for optical transceiver. Approved ISO9001,IS20000 quality system certification and ROHS, CE, FCC, TUV certification. Warranty:3 years; Factory price!
Supports 8-line traffic copy Low insertion loss Completely passive No traffic modification No power required, no IP address Provides security against remote attacks Cost-effective
IL<3.5dB , 100GHZ DWDM MUX DEMUX Good channel to channel uniformity The complete passive solution requires no power cabling and no configuration Fully compatible with all ITU-T 1G/10G/25G/40G/100G DWDM optical devices Multiplexing of 8 channels on a single fiber Supports metro, regional and long-haul DWDM networks
Multiplexing of up to 8 channels on dual fiber Monitor port for troubleshooting, 1310nm port for legacy traffic Fully compatible with all ITU-T 1G/10G/25G CWDM optics Transparent to Ethernet, FC, OTN, SONET/SDH and other protocols Applications in metro, regional CWDM networks
IL<2.4dB, 100GHZ DWDM MUX DEMUX Passive device, no power supply, no cooling Fully compatible with all ITU-T 1G/10G/25G/40G/100G DWDM optical devices Multiplexing of 8 channels over dark fiber networks Supports metro, regional and long-haul DWDM networks
Available in 8, 12 and 24 fibers Custom capillary lengths to meet different installation situations Single-fiber connector interface available as simplex or duplex channel in both SC and LC High performance in IL and RL Precise sizing 100% internally tested Supports higher speed Ethernet and Fibre Channel applications (OM3, OM4 and SM fiber)
Low insertion loss High channel isolation Low polarization dependent loss Excellent reliability and stability
IL<2.4dB , 100GHZ DWDM MUX DEMUX Multiplexing of up to 8 Channels on Fiber Pair to Maximize the Usefulness of Existing Fiber Low Insertion Loss: Typical 3.0dB, Max 3.3dB Passive Transparent Any Rate, Any Service Multiplexing Compliant with All Optical Networking Products (ITU Grid) 1310nm and Expansion Port for Increasing Capacity Monitor Port Taps off 1% of the Signal to Monitor the Channel Power Levels
Fully Compatible with All ITU-T 1G/10G/25G/40G/100G DWDM Optics Multiplexing of 40 Channels with 1310nm and Monitor a Dark Fiber Network IL<3.5dB , 100GHZ DWDM AAWG Technology Passive devices, No Power No Cooling Required Support Metro, Regional and Long Haul DWDM Networks
IL<2.4dB , 100GHZ DWDM OADM MUX DEMUX Passive device, no power supply, no cooling Fully compatible with all ITU-T 1G/10G/25G/40G/100G DWDM optical devices Drop and add multiplexing of 8 channels on dark fiber networks Supports metro, regional and long-haul DWDM networks
100G QSFP28 DWDM optical transceiver module, support 48*100Gb/s DWDM System and up to 80 km transmission on SM fiber, it works in high-speed IDC connection solutions.
Low power consumption Low EMI design Highly reliable 850nm VCSEL technology Up to 4*10Gbps data Up to 100 meters of link on OM3 cable and up to 150 meters on OM4 cableu Electrically hot-pluggable
It is compliant with OIF CEI-28G-VSR and QSFP28 MSA. 100G QSFP28 DWDM optical transceiver module supports 48*100Gb/s DWDM system with transmission distance up to 80km over SM fiber. It is designed to be deployed in DWDM network equipment in metro access and core networks. It is suitable for high-speed IDC connectivity solutions.
IL<3.5dB, 100GHZ DWDM MUX DEMUX Multiplexing of 16 channels through dark fiber network Fully compatible with all ITU-T 1G/10G/25G/40G/100G DWDM optical devices Passive device, no power supply, no cooling Can be used in metro, regional and long-haul DWDM networks
Low insertion loss High return loss High dense space Excellent mechanical endurance Ceramic ferrules connector High credibility and stability
Low insertion loss High channel isolation Low polarization dependent loss Excellent reliability and stability Single-channel 3-port FWDM filter for FTTH/FTTx optical networks
10G SFP+ optical transceiver modules, supporting 10Gb/s and up to 100km transmission, including. SFP+ SR, SFP+ LR, SFP+ ER, SFP+ ZR, etc. It is suitable for high-speed IDC connectivity solutions, 5G network front-end transmission solutions, network switches, PTN, OTN, etc.
High reliability and stability Low insertion loss High return loss High extinction ratio
10G SFP+ optical transceiver modules, supporting 10Gb/s and up to 100km transmission, including. SFP+ SR, SFP+ LR, SFP+ ER, SFP+ ZR, etc. With low power consumption and high speed, 10G SFP+ transceivers are ideal for data centers, 10G Ethernet, Fibre Channel and more. It is suitable for high-speed IDC connectivity solutions, 5G network front-end transmission solutions, network switches, PTN, OTN, etc.
Low insertion loss High channel isolation Low polarization dependent loss Excellent reliability and stability
IL<2.7dB ,100GHZ DWDM OADM MUX DEMUX Fully compatible with all ITU-T 1G/10G/25G/40G/100G DWDM optical devices Drop and add multiplexing of 8 channels on dark fiber networks Passive device, no power supply, no cooling Supports metro, regional and long-haul DWDM networks
Subscribe to our weekly newsletter and receive exclusive offers on products you love!
X
