1K321-73030 Excavator Fuel Pump 6BT-3636318 The function of the fuel pump is to suck the fuel out of the fuel tank, pressurize it and transport it to the fuel supply pipe, and cooperate with the fuel pressure regulator to establish a certain fuel pressure. Our products are according to the standard of OEM to manufacture.

1W1700 Excavator Engine Fuel Transfer Pump For D350E The function of the fuel pump is to suck the fuel out of the fuel tank, pressurize it and transport it to the fuel supply pipe, and cooperate with the fuel pressure regulator to establish a certain fuel pressure.

Oil pump 2Z 1Z 1DZ 15100-78700-71 06A115105B The fuel system of the excavator is mainly composed of fuel tank, filtration system, oil inlet pipeline, oil return pipeline and fuel system inside the engine, etc., the fuel system is a very important system, and the quality of the system design directly affects the engine power and the efficiency of the excavator. The fuel system inside the engine is very precise, it needs better lubrication and cooling, in order to ensure that these components regularly and quantitatively inject mist high-pressure fuel, so that it is possible to give full play to the power of the engine and effectively reduce engine emissions. Our products are according to the standard of OEM to manufacture.

4BD1 4BD1T 4BD1-T oil pump 8-94114491-1 8941144911 L210-0004S for ISUZU Parts The function of the fuel pump is to suck the fuel out of the fuel tank, pressurize it and transport it to the fuel supply pipe, and cooperate with the fuel pressure regulator to establish a certain fuel pressure. Our products are according to the standard of OEM to manufacture.

S6D95L S4D95L PC100 120-6 PC1011oil pump 6207-51-1201 6207511201 21MM for KOMATSU Because the engine has air entering the fuel tank during the oil return process, the change of fuel temperature will also increase the pressure in the fuel tank, therefore, the fuel tank must be designed with a vent to ensure that the pressure in the fuel tank shall not exceed 50kPa. In order to reduce the amount of dust in the air entering the tank, the air vents should be fitted with air filters. The fuel tank must have a 1.5mm vent and an oil return connection to facilitate the separation of air and other gases from the fuel without pressure in the fuel tank, and the vent must be able to avoid the ingress of dirt and water. The vent can be integrated with the fuel filler, and the fuel filler must be equipped with a filter with a filtration accuracy of 60um to prevent dirt from entering the fuel tank when filling fuel Our products are according to the standard of OEM to manufacture.