Noise meter PM 2.5 Dust PM Sensor gas sensor

Sales Noise meter PM 2.5 Dust PM Sensor gas sensor

♦Digital tube display, intuitive andconvenient

♦High accuracy 4 in 1 probe fortempeature, humidity, PM2.5PM10 measurement

♦Small volume, wall mountedflexible installation, easy to use

♦Full range temperature andhumidity compensation mea-surement,5~25vdc wide V-oltage design

Product Detail  

Noise meter PM 2.5 Dust PM Sensor gas sensor

This series of sensors has the characteristics of digital output, is completely interchangeable, does not require complex verification and calibration processes, and has outstanding performance in measurement accuracy, linearity, repeatability, interchangeability, and consistency.

It adopts the principle of non-dispersive infrared (NDIR), electrochemical sensor and high-performance microprocessor, and has a built-in temperature sensor for temperature compensation. It can measure atmospheric temperature and humidity, PM1.0/2.5/10, CO2, oxygen concentration, sulfur dioxide concentration, and hydrogen sulfide. concentration, ammonia concentration and formaldehyde, etc.

Technical Specification

Power Supply  10-30VDC
Maximum power consumption 0.5W (@24VDC)
Measurement Temperature/humidity/PM2.5/PM10/atmospheric pressure/light/TVOC/CO2/O3 CO/CH4/O2/SO2/NO2/H2/H2S/NH3/formaldehyde
10Working environment -10~55℃, 0~95%RH (No condensation)
Output signal RS485
Material ABS

 

ITEM RANGE RESOLUTION ACCURACY
Temperature -40~120℃ 0.1℃ ±0.5℃
Humidity 0~100%RH 0.1%RH ±3%RH
PM2.5&PM10 0~1,000ug/m3 ±1ug/m3 ±10%
Atmospheric pressure 0~120kPa 0.1kPa ±0.15kPa (@25℃,75kPa)
Light 0~200,000lux 1lux ±7%@25℃
TVOC 0~60,000ppb 1ppb ±8%FS±125ppb
CO2 0~5,000ppm 1ppm ±(40ppm,±3%FS)
Formaldehyde 0~5ppm 0.01ppm ±5%FS
O3 0~10ppm 0.01ppm ±6%FS
O2 0~25%VOL 0.1%VOL ±3%FS
H2S 0~100ppm 1ppm ±3%FS
CH4 0~100%LEL 1%LEL ±5%FS
CO 0~1,000ppm 1ppm ±3%FS
NO2 0~20ppm 0.1ppm ±3%FS
SO2 0~20ppm 0.1ppm ±3%FS
H2 0~1,000ppm 1ppm ±3%FS
NH3 0~100ppm 1ppm ±3%FS

 

Product Display

Monitoring Detector Gas Sensor

 Gas Sensor 0-1000ppm For Greenhouse

PM Sensor Show details

Co2 Transmitter side

FAQ

Could I have prices of your products?
Welcome. Pls feel free to send us an email here. You will get our reply in 24 hours

Can we print our logo/website/company name on products?
Yes, please advise the size and Pantone Code of the logo.

What's the lead time for regular order?
3~7 days for order quantity lower than 500pcs, For more quantity, usually 15 days.

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
X

Home

Supplier

Leave a message

Leave a message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.