The MPPT solar charge controller uses multiphase synchronous rectification technology and common negative pole design, it chooses high speed processor and advanced MPPT algorithm to make it has high response speed, high reliability and other standards.
The advanced MPPT algorithm that the solar controller adopts can trace the maximum power point of PV arrays quickly in any situation to obtain the max. power from PV arrays. And the multiphase synchronous rectification technology can achieve high conversion efficiency in any charging environment and improve the utilization rate of solar power system greatly. According to the rated voltage of battery bank system, our factory can provide the MPPT solar charge controller from 192V to 540V which suitable to almost off grid solar power system
LCD content
Feature
High speed and high performance 32-bit processor with excellent EMC design
Advanced MPPT tracking algorithm, the tracking efficiency more than 99%
High performance IGBT power module as electronic switch, there is no any mechanical switch, plus multiphase synchronous rectification technology, improves the stable greatly
Ultrafast maximum power point tracking speed to ensure tracking efficiency
Accurate identification and tracking of multi-peak maximum power points
With current-limiting charging function, charging current can be set, friendly and compatible with various capacity batteries.
Widely PV arrays’voltage input, this can save the cost of PV combiner box, wires and construction
Full enclosed duct design and high-speed fan for cooling makes the controller suitable for various harsh environment
It shows the ambient temperature. It also has automatic temperature compensation function and RTC real time function
The perfect battery protection function and multi-stage charging improves battery life
It has the statistical function of generating capacity which is very convenient for customers to view the daily, monthly and total charging capacity of the controller.
Complete menu display and operation, plus the humanized design of browsing interface, these makes the operation more easy
It can work with GEL. LEAD-ACID, LITHIUM and other type battery
Twice protection function to protect battery from damage when the power switch is down
Parameter:
Rated system voltage | 192V | 240V | 288V | 300V | 360V | 384V | 420V | 480V | 540V |
Rated Charging current | 50A 60A 70A 80A 100A | ||||||||
Charging technology | MPPT (Max. Power Point Tracking) | ||||||||
MPPT efficiency | >99.9% | ||||||||
Max. input voltage | 750V | ||||||||
Start charging voltage | Vbat+10V | ||||||||
MPPT start voltage | Vbat+20V | ||||||||
Charging method | Four stages: MPPT fast charging, equalize charging (constant voltage), float charging, end charging | ||||||||
Over voltage disconnect (V) | 256 | 320 | 384 | 400 | 480 | 512 | 560 | 640 | 720 |
Over voltage reconnect (V) | 240 | 300 | 360 | 375 | 450 | 480 | 525 | 600 | 675 |
Equalize charging (V) | 230.4 | 288 | 345.6 | 360 | 432 | 460.8 | 504 | 576 | 648 |
Equalize charging time | 120 minutes (default setting) | ||||||||
Float charging (V) | 220.8 | 276 | 331.2 | 345 | 414 | 441.6 | 483 | 552 | 621 |
Equalize charging recovery (V) | 211.2 | 264 | 316.8 | 330 | 396 | 422.4 | 462 | 528 | 594 |
Over discharging warning (V) | 168 | 210 | 252 | 262.5 | 315 | 336 | 367.5 | 420 | 472.5 |
Display | LCD+LED | ||||||||
Language | English | ||||||||
Connector type | TC series barrier terminal | ||||||||
Altitude | <3000 meter, it should reduce power if the altitude more than 3000 meter | ||||||||
Ambient temperature | -25~55 | ||||||||
Protection level | IP32 (indoor) | ||||||||
Dimension | 494*384*197mm | ||||||||
Weight | 27KG |