Motion Sensor Dimmer Switch 5.8G Frequency Sensor Output LED Power 9-18W

Sales Motion Sensor Dimmer Switch 5.8G Frequency Sensor Output LED Power 9-18W

Motion Sensor Dimmer Switch 5.8G Frequency Sensor Output LED Power 9-18W

Product Detail  

Motion Sensor Dimmer Switch 5.8G Frequency Sensor Output LED Power 9-18W


Features of Dimmable Motion Sensor:

1.5.8G microwave motion sensor with dimming function.

2.Power factor be equal or greater than 0.9.

3.The output power to the LED is 9-18w

4.Obtain EMC certification,and certificate number is EN55015

5.Suitable for ceiling lights or bulkhead.

6.Sensitivity and reliable

7.IP 20 and 3 years warranty.

Technical data of Dimmable Motion Sensor:

Model number HT16V 2
Input voltage 120-240VAC,50Hz/60Hz
Input current 0.3A Max
Input power 16w
Output LED current 0.3A/0.35A
Output LED voltage 30V-58V DC
Output LED power 9W-18W
Stand-by power ≤0.5W(230VAC)
Empty load voltage ≤63V
Power factor ≥0.9
Efficiency 87%(Max.)
Microwave frequency 5.8GHz±75MHz
Microwave power <0.3mW
Detection area 50%/100%
Hold time 5s/90s/5min/10min
Daylight threshold 2Lux/10Lux/50Lux/Disable
Stand-by period 0s/10s/10min/+∞
Stand-by dimming level 10%/30%
Mounting height Max.6m (ceiling mounted)
Deteation range Max.ø14m (ceiling mounted)
Motion detection 0.5–1.5m/s
Packing method

①the bubble pack,

②paper flat,

③outer carton(400*300*236mm)with drying agent(120pcs/carton,gross weight 8.24kg)

Detection angle 30°-150°
Operating temperature –20℃–+50℃ Tc:80℃
Abnormal protection SCP:Auto recovery,OVP,OCP,OTP
EMC standard EN55015
Safety standard EN61347-1 EN61347-2-13 EN60598-1
IP rating IP 20
Warranty 3 years

On/Off Control Detection Area Hold Time Daylight Sensor

Stand-by dimming Stand-by Output Current

level Period

Dtection Area of Dimmable Motion Sensor:

The fixture indicates teh maximun distance at the highest mounting height with 100% sensitivity.

Typical installation height 2.5-6M.

Mechanical structure of Dimmable Motion Sensor:

Dimensions of Dimmable Motion Sensor:

Wiring diagram of Dimmable Motion Sensor:

Setting of Dimmable Motion Sensor:

By dialing the code you can set the parameters you want to achieve the effect you want.

Detection area: Hold time: Daylight threshold: Stand-by period: Stand-by period:

In this area, The period of Definition of the The period of The definition movement will light keeping ambient brightness; light keeping of low output be detected 100% brightness only when the low output in the stand-by and able to after moving ambient brightness before it's period.

trigger the objects leave is lower than the completely sensor.100% the detection preset specific switched off,detection area area. lux amount,the when it's preset is also known sensor will be work; as"∞",the light

as the strong when it'spreset as always keep at sensitivity. "disable",the sensor low output if will work everytime no movement in it detects motion the detection regardness the area and doesn't ambient brightness. turn off.

Installation Method of Dimmable Motion Sensor:

1.Output current setting:

Set the current of 350mA with plugging the black cap and pull out to set with 300mA,More options of current requirements.

2.Installation:

The installation finished product drawing is shown:

Application of Dimmable Motion Sensor:

1.Automatically ON/OFF function:

Light on when detect movement and off after people leave at night.Applications:Corridor,Staircase.The daylight threshold is set to"2Lux,10Lux,50Lux".

With sufficient daylight,even With insufficient daylight, After the last detection and the when motion detected,light when motion detected, present hold time elapsed,remains OFF. light ON. light OFF.

2.No daylight function:

The daylight threshold is set to"Disable".Light on when detect movement,after people leave,light off after stand-by period,Applications:Dim places such as basement parking ,underpass.

When motion is detected, After people leave the After the last detection and the sensor will switch on the detection area,light remains the present hold time light to 100% brightness. 100% brightness within elapsed,light OFF.

hold time.

3.Function demo-dimable control/corridor function

With sufficient daylight,even With insufficient daylight, After the last detection the light when motion detected,light when motion detected, will be dimmed down to the remains OFF. light ON. stand-by dimming level

(10% or 30%)after hold time

After the stand-by period,

light OFF.

Application of Dimmable Motion Sensor:

User Notes:

1.Microwave can penetrate walls or glass thinner than 20cm and attenuate if thicker than 20cm.
2.The driver voltage shall be stable and float within 10%.
3.Detection area will be affected by speed of motion, mounting height and movement volume.
4.Conduct test on sunny days without the lampshade which will affect the tested lux value.

5.Factory default setting:detection area 100%/hold time 5s/daylight threshold disable/satnd-by period 0s/stand-by dimming level 10%.


Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
X

Home

Supplier

Leave a message

Leave a message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.