Mono Bifacial High Efficiency 530W Photovoltaic Power System 25 Years Guarantee

Sales

Off-grid Solar Power system is suitable for areas without grid-connected or unstable geid-connected power for Home.

Product Detail

High Efficiency 530W Photovoltaic Power System

No.of Cells:	144pcs 182mm Mono Cell	Model:	LC530-144M
Power:	5300W+ 0~5W	Product Warranty On Materials And Workmanship:	12YEARS
Linear Power Output Warranty:	25YEARS	ISO14001:	2015
ISO9001:	2015	Material:	Cells
OEM:	Accept
High Light:	OEM Photovoltaic Power System Mono Photovoltaic Power System Bifacial Photovoltaic Power System

OEM Accept Customize Mono Bifacial High Efficiency 530W Photovoltaic Power System Home 25 Years Guarantee

High Efficiency 530W Photovoltaic Power System

Bifacial PERC.

For a bifacial PERC cell, the Al back surface field is replaced by Al grid, hence render the majority of rear side transparent
which enable the cell to absorb light and generate electricity from both sides.

Front side performance equivalent to conventional low LID mono PERC:

-High module conversion efficiency (up to 20.9%).

-Better energy yield with excellent low irradiance performance and temperature coefficient.

-First year power degradation<2%.

Bifacial technology enables additional energy harvesting from rear side(up to 25%).

Glass/glass lamination ensures 30 year product lifetime ,with annual power degradation <0.45%,

1500v compatible to reduce BOS cost.

Solid PID resistance ensures by solar cell process optimization and careful module BOM selection .

Reduced resistive loss with lower operating temperature.

Higher energy yield with lower operating temperature.

Reduced hot spot risk with optimized electrical design and lower operating current.

Parameter:

Model Number			LC530-144M			LC535-144M			LC540-144M
Testing Condition			STC	NOCT		STC		NOCT	STC	NOCT
Maximum Power(Pmax/W)			530	395.8		535		399.5	540	403.3
Open Circuit Voltage(Voc/V)			49.20	46.03		49.35		46.17	49.50	46.31
Short Circuit Current(Isc/A)			13.71	11.08		13.78		11.14	13.85	11.19
Voltage at Maximum Power(Vmp/V)			41.35	38.55		41.50		38.69	41.65	38.83
Current at Maximum Power (Imp/A)			10.80	8.65		10.87		8.70	10.93	8.76
Module Efficiency(%)			20.7%			20.9%			21.1%
STC(Standard Testing Conditions):Irradiance 1000w/m²,Cell Temperature 25℃,Spectra at AM1.5. NOCT(Nominal Operating Cell Temperature)
Pmax/W	Voc/V	Isc/A	Vmp/V		Imp/A		Pmax gain
467	49.4	12.09	41.2		11.34		5%
490	49.4	12.67	41.2		11.88		10%
512	49.5	13.24	41.3		12.42		15%
534	49.5	13.82	41.3		12.96		20%
556	49.5	14.40	41.3		13.50		25%
Electrical characteristics with different rear side power again (reference to 445W front)

Bifacial Power Generation:

The energy yield of bifacial module can be influenced by albedo, height of module, GCR and DHI etc. Installation height of
bifacial module is recommended to be higher than 1m. Shading from bracket and junction box should be avoided. At present, the power generation of bifacial module on fixed brackets and single axis tracker can be simulated with PVsyst. Investors can determine the DC/AC ratio of bifacial module system to minimize the LCOE.

energy yield of bifacial module