♦0-50℃ temperature compensation and a heating device is installed on the transducer, which automatically heats when the temperature is below 10°C, ensuring normal measurements in extremely low-temperature or icy conditions ♦ Low power consumption: <100mA ♦Measurement results are not affected by obstacles ♦With lightning protection, surge protection, and overcurrent protection

♦LCD display, easy to read.The two-in-one level and liquid level are displayedby colleagues, and it supports switching between Chinese and English. ♦Intelligent sound wave & Echo analysis.Intelligent acoustic wave technology can perform intelligentecho analysis, without any debugging and other special steps,with an accuracy of0.5%,and it can resist variousinterferencewaves. ♦There are coil shock protection inside and outside the installationwhich is more stable, and the shell is integrally sealed to preventmoisture and ensure that the installation is more stable and firm.

♦ Non-invasive transducers are easy to install, cost effective, and require no pipe cutting or processing interrupt. ♦ Wide liquid temperature range: -35℃~200℃. ♦ Data logger function. ♦ Thermal energy measurement capability can be optional. ♦ For commonly used pipe materials and diameters from 20mm to over 6.0m. ♦ Wide bi-directional flow range of 0.01 m/s to 12 m/s.

♦ 20 coordinate points to describe the river’s shape of cross section. ♦ One instrument can measure the velocity, depth and conductivity at same time. ♦ Velocity Range : 0.02mm/s to 10m/s bi-directional, accuracy is 1% and the depth Range: 0 to 10m. Depth is measured by both the pressure sensor and ultrasonic level sensor principles. ♦ Measure velocity in both forward flow and back flow. With coordinate correction and pressure compensation function. ♦ IP68 Epoxy-sealed body design, long time under water. ♦ RS485/MODBUS output, can contact computer directly.

♦MiNl Non-Contact Infrared thermometer ♦0.5 seconds non-contact fast response ♦-32°C~320°C temperature range ♦Cold hot spot easily solve the problem ♦D:S distance for accurate measurement results

♦ Laser pointer for accurate target aiming ♦ Simple one-handed operation ♦LCD with back light ♦ Laser ON/OFF Switch ♦ Low battery indication ♦LED back light system for operation under poor illumination ♦ Automatic Power off in 7 seconds without any operation ♦Display hold, Scan function

♦Set with 4 thermocouples ♦Wide measurement temperature range ♦High mobility and operation ♦2 Temperature display with differential temperature (T1-T2) ♦ Protected by silicon rubber holster

♦1mK temperature resolution, 0.1mΩ/0.1μV electrical measurement resolution, meeting various test requirements ♦AC drive measurement technology, eliminating the influence of thermoelectric potential EMF, ensuring accurate measurement Rich data display functions, supporting maximum, minimum, and average , Trend display l Built-in rechargeable lithium battery, which can be charged with universal USB TYPE-C data ♦Data recording function, the data recording file (.CSV) can be exported through a data cable connected to the computer ♦Built-in user correction program, with standard constant temperature environment can be used on-site Fine-tuning ♦All-aluminum alloy metal shell anti-interference, rotating shaft probe structure, the display screen can rotate horizontally or vertically l Temperature units can be freely switched between ℃, ℉ and K