The Meltblown Filter Cloth can be used for various masks with a filtration efficiency of over 95%. Melt Blown Nonwoven fabrics, similar to Spunbond fabrics, obtained by continuous filaments extruded polymers through special spinnerets.
Meltblown Filter Korean Standard
Item | Meltblown Filter | |||
Composition | PP | |||
Average Cloth Weight | 25 GSM | 40 GSM | ||
Color |
white, black | |||
Function |
soft, flame retardant, waterproof, breathable, electrostatic, non-polluting, non-toxic, environmentally friendly, has high filtration performance and soft feel, and can block and filter dust, particles, bacteria and viruses;
standard: EN14683 type I/type II/type IIR, ASTM F2100 level 1/level 2/level 3, FFP1/FFP2, KN95, KN99, KF94, N95, N100
|
|||
Width | 17.5/26 cm | 25/26 cm | ||
Filter Factor | BFE99% | BFE 99.5%~100% | ||
Airflow | under 32L/min air flow PFE salt (NaCl) partical 98%+ | under 85L/min air flow PFE salt (NaCl) partical 95%+ | under 85L/min air flow PFE salt (NaCl) partical 99%+ | under 95L/min air flow : PFE both salt (NaCl) & oil-based (DEHS) partical 95%+ |
Length | 1000/2500 m | 1300 m | ||
Diameter of Each Roll | 43/73 cm | 55 cm | ||
Package | 3/2 rolls/carton | 2 rolls/carton | ||
Weight | approx 15-16 kg/14-15 kg/32-35 kg | approx 26-28 kg/27-29 kg | ||
Carton Size | 49.5x49.5x54.5/73*73*52.5 cm | 49.5x49.5x54.5 cm |
Model |
Type |
Weight g/m³ | Max resistance(Pa) | Max penetration(%) | Properties | Flow rate(L/min) | Medium |
Feather
|
P Series | FFP1 | 40 | <40 | >80 | Oil and Non-oil Particals | 95L | DOP | FFP1 mask |
FFP2/KF94 | 50 | <160 | >94 | 95L | DOP | FFP2/KF94 mask | ||
FFP3 | 80 | <190 | >97 | 95L | DOP | FFP3 mask | ||
KN Series | KN90 | 40 | <80 | >90 | Non-oil Particles | 85L | NaCl | KN90 |
KN95/N95 | 50 | <100 | >95 | NaCl | KN95、N95 | |||
KN100 | 80 | <175 | >99.97 | NaCl | KN99、N100 |
U.S.A.:ASTM F2100-19 STANDARD SPECIFICATION FOR PERFORMANCE OF MATERIALS USED IN MEDICAL FACE MASKS | |||||||
EUROPE:EN 14683:2019 MEDICAL FACE MASKS-REQUIREMENTS AND TEST METHODS | |||||||
ASTM F2100-19 | EN 14683:2019 Barrler Levels | ||||||
level 1 | level 2 | level 3 | Type Ⅰ | Type Ⅱ | Type ⅡR | ||
Barrier Testing |
BFE%
ASTM F2101, EN 14683
|
≥95 | ≥98 | ≥95 | ≥98 | ||
PFE%
ASTM F2299
|
≥95 | ≥98 | Not required | ||||
Synthetic Blood ASTM
F1862, ISO22609
|
Pass at
80 mmHg
|
Pass at
120 mmHg
|
Pass at
160 mmHg
|
Not required | Pass at ≥ 16.0 kPa(120 mmHg) | ||
Physical Testing |
Differential Pressure
EN 14683
|
<5.0 mmH₂O/cm² | <6.0 mmH₂O/cm² | <40 Pa/cm² | <60 Pa/cm² | ||
Safety Testing |
Flammability
16 CFR Part 1610
|
Class 1(≥3.5 seconds) |
See European Medical Directive
(2007/47/EC, MDD 93/42/EEC)
|
||||
Microbial Cleanliness
ISO 11737-1
|
Not required | ≤30 cfu/g | |||||
Biocompatibility
ISO 10993
|
510 K Guidance recommends testing to IS0 10993 | Complete an evaluation according to ISO 10993 |
Melt blown fabric can be used for filter materials, wiping materials, filling materials (warmth), battery separators, etc.
FOSHAN GUIDE TEXTILE CO., LTD.,which is located in Foshan city. We are engaging in manufacture and sales of non woven fabric and non woven related products, since 2005. Up to now, we have professional elite sales team, several advanced non woven production lines with width of 1.6M, 1.9M, 2.1M, 2.4M, 2.5M, 3.2M, 3.7M, 4.8M, etc. Our products are well sold both in domestic and overseas markets, widely used in areas of agriculture and gardening, medical and hygiene, personal care and beauty, industry application, packaging and wrapping, foundation and building, hotel and restaurant, labor protection and household, decoration, etc. Hot-sale products are pp (polypropylene) non woven fabric, pet (polyester) non woven fabric, sms non woven fabric, elastic non woven fabric, flower wrapping material, disposable underwear, disposable bed sheet, weed control fabric, disposable table cloth, fruit protection bag.
1. Are you manufacturer?
Yes, we have our own factory and trade team. Can supply you the most professional technical support and the best service.
2. What’s the MOQ?
Ourcustomized MOQ normal is 10000 pieces/model.A small number of styles are available from stock.
If you just need small quantity by LCL is also ok. But the charge will be higher.
3. Can I get a sample from your company? Should I pay for the express fee?
4. If I want to order a small quantity goods, can you provide PP meltblown?
But if not, don’t worry, we can take your order with our other clients’ order to be produced together.
But it needs to wait some time .
5. Can you do OEM?
6. What’s your price?
After know your details information, we will offer the most competitive price to you.
7. What is your order payment terms ?
8. How about your lead time?
9. How will you follow my order?
10. What is your exporting countries?
We have good sales performance and win good international reputation in more than 15 Countries and regions, such as Japan, America, Australia,Russia, Canada, Middle East and so on.