XUVALdouble sphere rubber expansion joints are designed for piping systems to absorb pipe movements, relieve stress, reduce system noise/vibration, compensate for misalignment/offset and to protect rotating mechanical equipment against start-up surge forces.
XUVAL double sphere rubber expansion joints are inherently stronger than the conventional hand-built style spool arch type. Internal pressure within a “sphere” is exerted in all directions, distributing forces evenly over a larger area. The spherical design “flowing arch” reduces turbulence and sediment buildup.
Features and Benefits:
Absorbs Directional Movement
Thermal movements appear in any rigid pipe system due to temperature changes. XUVALdouble sphere rubber expansion joints allow for axial compression or axial extension, lateral deflection as well as angular movement.
KXT-S Flexible Dual Spherical Rubber Joint
KXT double sphere flexible rubber joint:rubber joint is also known as rubber soft joint, pipe shock absorber, shock absorber, soft joint, etc.This product introduces foreign advanced production technology, the inner layer is subject to high pressure in the production process, the nylon cord cloth and the rubber layer are better combined, the working pressure is higher than the ordinary flexible rubber joint, the quality is better.
KXT double sphere flexible rubber joint
KXT double sphere flexible rubber joint:rubber joint is also known as rubber soft joint, pipe shock absorber, shock absorber, soft joint, etc.This product introduces foreign advanced production technology, the inner layer is subject to high pressure in the production process, the nylon cord cloth and the rubber layer are better combined, the working pressure is higher than the ordinary flexible rubber joint, the quality is better.Its characteristic is the inner rubber layer blends into one, the smooth seamless mark, the label USES the vulcanization craft, and the product unifies together.
It can be widely used in water supply and drainage, circulating water, HVAC, fire fighting, papermaking, pharmaceutical, petrochemical, Marine, water pump, compressor, fan and other piping systems.
Technical parameters:
|
Model |
KXT-S1 |
KXT-S2 |
KXT-S3 |
| Item | |||
| Mpa(kgf/cm²) Working pressure | 1.0(10) |
1.6(16) |
2.5(25) |
|
Mpa(kgf/cm²) Explosion pressure |
2.0(20) | 3.0(30) | 4.5(45) |
| Kpa(mm/Hg) Vacuum | 53.3(400) | 86.7(650) | 100(750) |
| ℃ Applicable Temperature |
-15℃~115℃（-30℃~250℃ under special conditions) |
||
| Applicable media |
Air,compressed air,water,sea water,hot water,oil,acid,alkali,and so on. |
||
|
DN |
L mm |
Flange thickness mm |
Bolts Qty n |
Diameter of Bolt hole mm |
D1 mm |
Axial displacement(mm) |
Horizontal displacement (mm) |
Angular Deflection (a1+a2) |
||
|
mm |
inch |
Extension | Compression | |||||||
| 40 | 1.5 | 150 | 18 | 4 | 18 | 110 | 10 | 20 | 20 | 30 |
| 50 | 2 | 150 | 20 | 4 | 18 | 125 | 10 | 20 | 20 | 30 |
| 65 | 2.5 | 150 | 20 | 4 | 18 | 145 | 10 | 20 | 20 | 30 |
| 80 | 3 | 150 | 20 | 8 | 18 | 160 | 10 | 20 | 20 | 30 |
| 100 | 4 | 200 | 22 | 8 | 18 | 180 | 15 | 30 | 25 | 30 |
| 125 | 5 | 200 | 22 | 8 | 18 | 210 | 15 | 30 | 25 | 30 |
| 150 | 6 | 200 | 24 | 8 | 23 | 240 | 15 | 30 | 25 | 30 |
| 200 | 8 | 220 | 24 | 8 | 23 | 295 | 20 | 40 | 30 | 30 |
| 250 | 10 | 220 | 26 | 12 | 23 | 350 | 20 | 40 | 30 | 30 |
| 300 | 12 | 320 | 26 | 12 | 23 | 400 | 20 | 40 | 30 | 30 |
| 350 | 14 | 320 | 26 | 16 | 23 | 460 | 20 | 40 | 30 | 30 |
| 400 | 16 | 320 | 26 | 16 | 25 | 515 | 20 | 40 | 30 | 30 |
| 450 | 18 | 320 | 26 | 20 | 25 | 565 | 25 | 45 | 30 | 30 |
| 500 | 20 | 320 | 28 | 20 | 25 | 620 | 25 | 45 | 30 | 30 |
| 600 | 24 | 320 | 30 | 20 | 30 | 725 | 25 | 45 | 30 | 30 |
NOTE:
1.For special order,products can be made according to customer's requirements,flange standard is based on GB/T9115.1-2000,the materials of spheres are Buna,EPDM,chloroprene rubber and so on.
2.The product with DN>200mm is available for water-supplying overhead.The pipe must be equipped with fixed support or fixed bracket, if not,the product shall be installed with escapement.
3.When using Rubber Joints, the matching flanges should be valve flanges or GB/T9115.1(RF) FLANGES.
Packing & Delivery :
Packing Details : all by seaworthy plywood case and packed strongly by packing belt as below
Delivery Details : Generally it is 5-10 days if the goods are in stock. or15-30 days if the goods are OEM or not enough subject to the order quantity. But anyway, normally, we are able to make sure the delivery will not exceed 45days.
Subscribe to our weekly newsletter and receive exclusive offers on products you love!
X
Gold Supplier
