Wire Length 300mm Remote Control Easy Install Sensor With Dc Input
Installation of DC motion sensor:
3 pin connector,plug and plug,very easy to install and easy to use by end customer.
| Installation precautions of motion sensor | 1. Microwave sensor can be installed in any lamp except the one with full metal shell. |
| 2. The detected surface cannot be shielded by metal objects. | |
| 3. Make sure the microwave module is completely exposed outside. | |
| 4. The detection surface of the sensor module shall be installed facing the detection area. | |
| 5. Should be kept away from the driver to avoid interference generation and lamp flashing. | |
| 6. Wiring must be strictly in accordance with the wiring diagram to avoid short circuit. |
Suitable for ceiling light, troffer, triproof light, batten light, linear light, LED tube and etc.
Features of Sensor:
1. With connector to make it easier to be connected with the LED driver. Save time.
2. Automatic On/off control with Daylight sensor.
3. Compact sized suitable for ceiling light,troffer , triproof light, LED tube and etc.
5. -40~80℃ working temperature to support different environment;
5. Sensor size 66*20.5*12.1mm
Wiring diagram of Motion Sensor:
| Wire color | Cable length 300mm , Black 12V,Purple DIM+, Yellow DIM |
| Control method | On/off / 1-10V /remote control |
| Microwave frequency | 5.8GHz±75MHz |
| Operating voltage | 10.5-15V DC (supply current>50mA) |
Detection coverage of Motion Sensor:
| Mounting height | 2.5-5m (ceiling mounted) |
| Detection range | D*H,radius1.5-4m*5m (ceiling mounted) |
| Detection angle | 360°(ceiling mounted); <150° (Wall Mounted) |
| Motion detection | 0.5~1.5m/s |
Product Description of Sensor:
| Control line | Cable length 300mm , Black 12V,Purple DIM+, Yellow DIM |
| Operating temperature | -40°C~+80°C |
| Operating voltage | 10.5-15V DC (supply current>50mA) |
| Warranty | 5 years |
| Stand-by power | ≤0.5W |
| Operating current | 30mA |
| Control method | DIM/1-10V / remote control |
| Microwave frequency | 5.8GHz±75MHz |
| Microwave power | <0.3mW |
| IP grade | IP 20 |
Mechanical structure of Motion Sensor:
| Stand-by period | 0s/10s/30s/1min/5min/10min/30min/+∞ |
| Stand-by dimming level | 10%/20%/30%/50% |
| Detection area | 25%/50%/75%/100% |
| Hold time | 5s/30s/1min/3min/5min/10min/20min/30min |
| Daylight threshold | 2Lux/10Lux/30Lux/50Lux/80Lux/120Lux/Disable |
Dimensional drawing (Unit: mm) of Motion Sensor:
Compact size suitable for all kinds of lamps.
Subscribe to our weekly newsletter and receive exclusive offers on products you love!
X
Gold Supplier
