Cooling tower can reduce the energy consumption of chillers, save energy, ensure the efficient operation of chillers, and is suitable for a variety of climates. Small in size, low in height, light in weight, beautiful in appearance, compact in structure and light in height, especially suitable for installation in indoors and balconies where the narrow height of the site is restricted, and the cooling effect is good and the running noise is low.

Evaporative Condenser is a series of products developed and designed by stellar for industrial refrigeration. The difference between the evaporative condenser and the cooling tower is that the phase change of the cooled working medium can be divided into two types, countercurrent flow and mixed flow according to the flow direction of the air and the spray water.

HBC chiller use the world famous hermetic scroll type compressor,feature low noise,low vibration,low energy consumption and high efficiency.Environment-friendly R407C,R410A,R404A,R134A,etc,which is no harm to the ozone layer.Static plastic spray outer casing with simple structure and elegant appearance.

Heat exchangers are a general-purpose equipment widely used in petrochemical, metallurgy, refrigeration, gas and other industries.

Air cooled Screw Type Central Chiller System OMC-240ADH. 200 ton air cooled screw chiller, LCD Touch screen controller or PLC temperature controller, High temperature control accuracy.

“H'Stars” Flooded and Screw type water cooled chiller has higher heat transfer efficiency, and the temperature difference between the water outlet temperature and the evaporation temperature is small, and the resistance along the path is small. It is suitable for units with large circulation and good cooling effect.

High efficiency and energy saving: the crossflow plate heat exchanger pre-cools the exhaust air and transfer that heat into the fresh air for reheat, the heat exchange efficiency of exhaust air and fresh air more than 90%, the exchanger can reduce the required air conditioning tonnage of fresh air and overall energy consumption by over 60~90%

H'Stars heat pump drying unit is developed by Stellar to produce hot air drying products. It uses air as a low-level heat source to produce hot air, which is energy-saving, efficient, and environmentally friendly compared to other methods of producing hot air.

15HP Stainless Steel Heat Exchanger industrial water chiller OMC-15W. Building in Semi-hermetic piston compressor 316 Stainless steel Shell and tube condenser and evaporator.

40STD Series flooded type water source heat pump can reach the highest COP is 6.0, the lowest chilled water temperature is 5℃ and the highest water outlet temperature is 50℃

“H'Stars” heat recovery screw-type water source heat pump unit uses the chiller to exchange heat between the refrigerant vapor and water during operation, converting the energy-consuming heat into usable hot water, and providing a large amount of air-conditioning while providing air-conditioning. Hot water in life.

Industrial and commercial screw screw heat pump is equipped with high-efficiency finned heat exchanger and widely used in building air conditioning systems, small and medium-sized offices, factory workshops, wine hotel stores, villas and other air-conditioning environments.

Multifunction Central Station AHU, it is apply to hospital, mushroom greenhouse, food processing workshop etc. We can precise control the humidity of the air to satisfied your working condition. What's more, we can also precise control the clean level, cooling or heating capacity of the AHU. Our products are all customized manufacture, we design the own unit for you.

Hstars Magnetic oil free bearing centrifugal chiller Cop up to 6.7 (GB working condition) IPLV up to 11.6 (AHRI working condition)

chiller water fan coil unit for heating and cooling 1. Cooling capacity scope: 3kw -----14kw Air flow volume: 470m3/h-----3070m3/h

This kind of sea water shell and tube heat exchanger is widely used in marine equipments but also suitable for those system which needs to process chemical or corossive liquid.

3HP Small size industrial water cooled chiller OMC-3W. High efficient, High quality, 15 Months warranty.

15 HP Open type scroll water chiller unit OMC-15W. Water cooled chiller without pump, tank and box, Lower cost commercial water cooled chiller.

5HP Stainless Steel air cooled water chiller OMC-5A. 304 Stainless stell plate for housing, Widely used in food industry,easy to clean. Build in Copeland compressor from USA. Evaporator use 304 Stainless Steel Plate Heat Exchanger. Build in Stainless Steel Pump and water tank.

Water Cooled Screw Chiller 50Ton Cooling Capacity OMC-60WSH, Single Hand or Double Hands optional. Use High efficient Semi-Hermetic Screw Compressor Hanell Brand (From Taiwan) or Bitzer Brand (From Germany). Chilled Water Temperature Range 5℃-35℃.