The moment clips are designed to resist horizontal, torsional and vertical (uplift) loads. These clips are prepunched with a series of attachment holes for steel framing connections and a 1/2” anchor bolt hole for foundation connections.
Wall Vertical moment clip
ZB210 series moment clip, it is used for connecting the top and side of the wall with straight and corner, it is fixed with thin flat head or round head washer driller tail screw, no less than 6 screws for each end, evenly used. Normally, 2.0 mm thick for the lower floor and 1.5 mm thick for the high floor layer. ZB121 may be replaced on the compliance with relevant national standards.
Wall Top LGS.
moment clip.
Wall Vertical LGS.
ZB210 series moment clip, thickness is 1.5mm and 2.0mm, pre-punching, dislocation arrangement, width of 80mm, little less than the total height of the two LGS, can be used vertically, connect the two walls, round corners treated, safe and smooth.
Model：ZB210-15, ZB210-20,
Dimensions：80*210*1.5（mm）
Material: Q345 (Grade: SGH340 – Z275)
Zinc layer: 2 sides 275 g/M2
The top of 2 walls connect – The right angle of walls connect – The side of the vertical walls connect
|
|
 |
|
|
|
|
|
|
Subscribe to our weekly newsletter and receive exclusive offers on products you love!
X
Gold Supplier
