Wholesale Komatsu PC100 track roller for Excavator undercarriage parts/ Crawler Track Parts

The sprocket is composed of collar、idler shell、shaft、seal、o-ring、bushing bronze、lock pin plug，the idler is applicable to special model of crawler type excavators and bulldozers from 0.8T to 100T.it is widely applied in bulldozers and excavators of Caterpillar,Komatsu,Hitachi,Kobelco,Kubota,Yanmar and Hyundai etc,have different manufacturing technology,like casting,welding and forging,use precision processing technology and special heat treatment technique to reach best wear-resistance and have maximum extent loading capacity as well as anti-cracking. The function of an idler is to guide the track links into running smoothly and to prevent dislocation,idlers also carry some weight and therefore increasing groud pressure.there is also an arm in the center which supports the track link and guides the two sides.the smaller the distance between the idler and track roller,the better the orientation. Our products are according to the standard of OEM to manufacture.

113-2907 Excavator Idler Roller E320/E200B The function of an idler is to guide the track links into running smoothly and to prevent dislocation,idlers also carry some weight and therefore increasing groud pressure.there is also an arm in the center which supports the track link and guides the two sides.the smaller the distance between the idler and track roller,the better the orientation. Our products are according to the standard of OEM to manufacture.

DH300 high quality Track Roller Undercarriage Parts excavator for PC200-5 CAT235 The supporting roller is often in the lower part of the track, and the track is supported upward, so that the track ensures a certain tension and prevents deviation and deviance.It is widely applied in bulldozers and excavators Caterpillar, Komatsu, Hitachi, Kobelco, Kubota, Yanmar and Hyundai etc. Our products are according to the standard of OEM to manufacture.

Dh500 Track Roller For Daewoo Excavator Parts Rollers are used to support the weight of the tractor while rolling on the rails (rail links) or track decks of the tracks, and they are also used to restrain the tracks and prevent lateral slippage. When the tractor turns, the rollers force the track to slide on the ground. Rollers are often exposed to mud and dust and are subjected to strong impacts, so they require reliable seals and wear-resistant rims

EX40 Excavator Bottom Roller Track Roller For Hitachi The function of the roller is to transfer the weight of the locomotive group to the ground and roll it on the track. To prevent derailment, the roller should also be able to prevent the track from moving laterally relative to it. rollers often work in mud and sand, and withstand strong impacts, the working conditions are extremely harsh, and the rim is easy to wear. the requirements for the roller are: the rim is wear-resistant, the bearing seal is reliable, and the rolling resistance is small.

Excavator Parts EX60 Track Roller For Mini Excavator Undercarriage Parts The function of the roller is to transfer the weight of the locomotive group to the ground and roll it on the track. To prevent derailment, the roller should also be able to prevent the track from moving laterally relative to it. Rollers often work in mud and sand, and withstand strong impacts, the working conditions are extremely harsh, and the rim is easy to wear. The requirements for the roller are: the rim is wear-resistant, the bearing seal is reliable, and the rolling resistance is small. Our products are according to the standard of OEM to manufacture.

Undercarriage Parts R60-5 R60-7 R60-9 Bottom Roller Track Roller For Hyundai Mini Excavator The function of the roller is to transfer the weight of the locomotive group to the ground and roll it on the track. To prevent derailment, the roller should also be able to prevent the track from moving laterally relative to it. Rollers often work in mud and sand, and withstand strong impacts, the working conditions are extremely harsh, and the rim is easy to wear. The requirements for the roller are: the rim is wear-resistant, the bearing seal is reliable, and the rolling resistance is small. Our products are according to the standard of OEM to manufacture.

Undercarriage Parts Ex60-1 Drive Sprocket Excavator Sprocket fit for Mini Excavator Hitachi The sprocket is composed of collar、idler shell、shaft、seal、o-ring、bushing bronze、lock pin plug，the idler is applicable to special model of crawler type excavators and bulldozers from 0.8T to 100T.it is widely applied in bulldozers and excavators of Caterpillar,Komatsu,Hitachi,Kobelco,Kubota,Yanmar and Hyundai etc,have different manufacturing technology,like casting,welding and forging,use precision processing technology and special heat treatment technique to reach best wear-resistance and have maximum extent loading capacity as well as anti-cracking. Our products are according to the standard of OEM to manufacture.

Undercarriage Parts Excavator Ex300 Sprocket for Hitachi The sprocket is composed of collar、idler shell、shaft、seal、o-ring、bushing bronze、lock pin plug，the idler is applicable to special model of crawler type excavators and bulldozers from 0.8T to 100T.it is widely applied in bulldozers and excavators of Caterpillar,Komatsu,Hitachi,Kobelco,Kubota,Yanmar and Hyundai etc,have different manufacturing technology,like casting,welding and forging,use precision processing technology and special heat treatment technique to reach best wear-resistance and have maximum extent loading capacity as well as anti-cracking. Our products are according to the standard of OEM to manufacture.

Ex400 Sprocket Undercarriage Parts Excavator Drive Sprocket The working principle of the excavator drive wheel involves power transfer. The power of an excavator is usually provided by an internal combustion engine or an electric motor. The internal combustion engine generates power by burning fuel and transmits the power to the drive wheels through the transmission. The electric motor converts electrical energy into mechanical energy and transmits it to the drive wheels through the transmission. Transmissions typically include components such as clutches, transmissions, and propeller shafts to control the speed and direction of power transmission. Our products are according to the standard of OEM to manufacture.

Bulldozer Undercarriage Parts D6D Track Idler Roller Front Idler Assy The function of an idler is to guide the track links into running smoothly and to prevent dislocation,idlers also carry some weight and therefore increasing groud pressure.there is also an arm in the center which supports the track link and guides the two sides.the smaller the distance between the idler and track roller,the better the orientation. Our products are according to the standard of OEM to manufacture.

D9N OEM Undercarriage Parts Idler Assy Front idler dozer parts The function of an idler is to guide the track links into running smoothly and to prevent dislocation,idlers also carry some weight and therefore increasing groud pressure.there is also an arm in the center which supports the track link and guides the two sides.the smaller the distance between the idler and track roller,the better the orientation. Our products are according to the standard of OEM to manufacture

Excavator Undercarriage Parts front idler D61P The function of an idler is to guide the track links into running smoothly and to prevent dislocation,idlers also carry some weight and therefore increasing groud pressure.there is also an arm in the center which supports the track link and guides the two sides.the smaller the distance between the idler and track roller,the better the orientation. Our products are according to the standard of OEM to manufacture.

Undercarriage Parts Bulldozer D65 Front Idler The function of an idler is to guide the track links into running smoothly and to prevent dislocation,idlers also carry some weight and therefore increasing groud pressure.there is also an arm in the center which supports the track link and guides the two sides.the smaller the distance between the idler and track roller,the better the orientation. Our products are according to the standard of OEM to manufacture.

Excavator Bulldozer E70B Front Idler Undercarriage Parts The function of an idler is to guide the track links into running smoothly and to prevent dislocation,idlers also carry some weight and therefore increasing groud pressure.there is also an arm in the center which supports the track link and guides the two sides.the smaller the distance between the idler and track roller,the better the orientation. Our products are according to the standard of OEM to manufacture.

Excavator Idler EC360 Undercarriage Parts Front Idler 1081-03910 The function of an idler is to guide the track links into running smoothly and to prevent dislocation,idlers also carry some weight and therefore increasing groud pressure.there is also an arm in the center which supports the track link and guides the two sides.the smaller the distance between the idler and track roller,the better the orientation. Our products are according to the standard of OEM to manufacture.

Excavator And Bulldozer Parts Excavator EC460 Track Wheel Front Idler The function of an idler is to guide the track links into running smoothly and to prevent dislocation,idlers also carry some weight and therefore increasing groud pressure.there is also an arm in the center which supports the track link and guides the two sides.the smaller the distance between the idler and track roller,the better the orientation. Our products are according to the standard of OEM to manufacture.

Excavator EX100 Undercarriage Parts Front Idler Assembly The function of an idler is to guide the track links into running smoothly and to prevent dislocation,idlers also carry some weight and therefore increasing groud pressure.there is also an arm in the center which supports the track link and guides the two sides.the smaller the distance between the idler and track roller,the better the orientation. Our products are according to the standard of OEM to manufacture.

Excavator Front Idler EX300-5 Undercarriage Spare Parts The four wheels refer to: rollers, drive wheels, idlers, and carrier pulleys. One belt refers to the tracks. As the name suggests, the rollers act as support and are located between the lower surface of the left/right beam of the chassis frame and the track. According to the tonnage of the excavator, there are usually 5-10 on one side. The driving wheel plays the role of driving the track, which is fixed on the travel motor, and the drive of the travel motor is transmitted to the track through the gear structure, usually one on each travel motor. The idlers act as guides the tracks, located at the opposite end of the drive wheels, usually two per excavator. The carrier roller plays the role of holding up the track, and according to the tonnage of the excavator, there are usually 1-2 carrier rollers on one side. Our products are according to the standard of OEM to manufacture.