CNCSC Flat Tow Truck is one truck for multipurpose, a truck drags two cars. And has two type are flat plate truck and the whole floor type truck.The tow truck is light in weight, strong in lifting and loading capacity, and skid resistant on the platform loading surface.

Fire truck, also known as fire engines, refer to special vehicles used to perform fire fighting tasks. The fire department in most countries of the world will also use it for other emergency rescue purposes.

The truck is composed by the tank, pump room, equipment boxes, power output and transmission system, piping systems, electrical systems and other components, widely used in urban public security fire brigades, petrochemical, industrial and mining enterprises, forests, ports and other departments.

Our tow truck consists of the chassis, hoisting equipment,truck tow hook, tow truck winch, tow truck wheel lift, hydraulic system, electric control system, truck body and the tool boxes.

CNCSC Water sprayer truck 4wd has a good power system and can drive well under a bad road conditions. And water transport truck also can be used for temporary emergency fire sprinkler, each sprinkler is equipped with a dedicated fire interface.

Skid mounted station make the lpg storage tanks, pumps, valves, instruments, equipment, etc. assembled on the formation of the overall filling station. As long as the user leveling the floor, hoisting in place, the tank filling liquid, access to power, immediately will open to use.

Oil tank truck has many functions of refueling or transporting oil. It has the functions of oil absorption, pump oil, many kinds of oil sub-loading, separate discharge and so on. The special part of oil truck consists of tank body, power collector, drive shaft, gear oil pump, pipe network system and so on. The pipe network system consists of oil pump, three-way four-position ball valve, two-way ball valve, filter net and pipeline.

It can add Mass Flow Meter for measuring unloading data, LPG compressor for speeding up unloading, Sun Shield for protection and connect with our management system to monitor the live data of tank's stock, unloading quantity and sales quantity.

The front end of the mixing tank is connected with the reducer and installed on the front end of the rack. The rear end is supported by two supporting wheels installed on the back end of the rack through the raceway.

Cranes are commonly employed in the transport industry for the loading and unloading of freight, in the construction industry for the movement of materials and in the manufacturing industry for the assembling of heavy equipment.

CNCSC Concrete Mixer Tank is adopted pear shaped structure has small inclination angle and low center of gravity, so driving is safe and stable. The tank and blades are made of special wear resistant steel, which can enhance wear resistance and prolong service life.

A crane mounted on a truck carrier provides the mobility for this type of crane. This crane has two parts: the carrier, often referred to as the Lower, and the lifting component which includes the boom, referred to as the Upper.

Garbage compactor consists of sealed garbage compartment, hydraulic system and operating system. The whole truck is fully sealed, self-compressed, self-dumped, and all the sewage in the process of compression is entered in the sewage compartment, which completely solves the problem of secondary pollution in the process of garbage transportation and avoids inconvenience to people.

4X2 10 Tons ISUZU Compression GarbageTruck Garbage Compactor Truck,Factory Direct Selling Compressed Garbage TruckJAPANESE Garbage Truck Good Price Garbag,3 Cubic 4cubic 5cubic Isuzu 600p 4X2 CompactorGarbage Truck,JAPANESE 6X4 Rear Compactor Garbage Truck,Garbage Compactor Truck/Waste Truck, 8m3 ISUZU Waste Compactor Garbage Truck,ISUZU Chassis 18cbm Compactor GarbageTruck for Exportation

The deck rollback tow truck can hoist, lift, draw and be with other special functions, mainly used in highway, garage and city road obstacle cleaning.

Synchronous chip seal truck is one of the most successful road-resurfacing methods, designed to extend the life of a road’s driving surface. The chip seal process involves applying a layer of asphalt emulsion and aggregate rock over the road. The process consists of liquid asphalt, immediately followed by rock chips.

Wrecker Tow Truck is equipped with emergency operation equipment .When the car is breakdown on the road, an accident is happend, especially on high grade highway, wrecker's mission is to towing the trouble truck or car away from the site of accident, to ensure the road unimpeded.

Compression garbage truck is fully sealed, self-compressed, self-dumped, and all sewage in the process of compression is entered into the sewage compartment, which completely solves the problem of secondary pollution in the process.we produce from 4,000L to 20,000L, Optional different turnover mechanism to adapt to different bins (120L, 240L, 660L etc.)

LPG semi-trailer for transportation of natural gas, liquefied petroleum gas and chemical raw materials. High-quality domestic or imported safety accessories, carburetor and pump for the user matching, fully furnished.

Best quality Manufacturer Japanese Isuzu Emergency Rescue Vehicle for sale manufacturer, Isuzu Fire-Fighting Vehicle, Foam Fire trucks Isuzu, Isuzu chassis Water foam type fire tender, Emergency Rescue Vehicle, Dry powder fire truck