triac dimmable led power supply 24v dc 60w led driver with 5 years warranty

Sales

An input voltage of 180-265vac, rated power is 60w. This led power supply 24v can be used to Onforu run back-lit ad signs, architecture lighting, landscape lighting and more.

Certification : SAA
Size : 210*68.5*43mm
Dimming mode : Triac dimmable
Output Current : 2.5A
Working Mode : Constant Voltage
Output Voltage : 24V
Input Voltage : 180-265V

Product Detail

led power supply 24v dc 60w led driver with 5 years warranty

An input voltage of 180-265vac, rated power is 60w. This waterproof led power supply 24v can be used to run back-lit ad signs, architecture lighting, landscape lighting and more. The EMC EMISSION comply with EN55015,EN61000-3-2 (≧50%load).

model		SMT-012-060VT	SMT-024-060VT
Output	DC Voltage	12V	24V
	Voltage Accuracy	±0.5V	±0.5V
	Rated current	5.00A	2.50A
	Rated power	60W	60W
Input	Voltage Range	90~135V AC/170～265V AC
	Frequency Range	47～63HZ
	Power Factor ( Typ.）	PF≧0.78/110V,PF≧0.80/170V,PF≧0.81/220V,PF≧0.82/265V
	Full Load Efficiency（Typ.）	>83%	>83%
	AC Current（Typ.）	0.61A/110VAC, 0.58A/170VAC, 0.46A/220VAC, 0.41A/265VAC
	Leakage current	﹤0.25mA/110V/220VAC
Protection	Short Circuit	Hiccup mode, recovers automatically after fault condition is removed.
	Over voltage	≦140VAC(90~135V) , ≦270VAC(170~265V)
Environment	Working TEMP.	-40～+60℃
	Working Humidity	20～90%RH,non-condensing
	Storage TEM.,Humidity	-40～+80℃，10～95%RH
	TEMP.coefficient	±0.03%/℃（0～50℃）
	Vibration	10～500Hz，2G 10min./1 cycle，period for 60min. each along X,Y,Z axes
Safety&EMC	Safety standards	EN-60950-1, EN61347-1/-2/-13
	Withstand voltage	I/P-O/P:3.75KVAC
	Isolation resistance	I/P-O/P：100MΩ/500VDC/25℃/70%RH
	EMC EMISSION	Compliance toEN55015,EN61000-3-2 (≧50%load)
	EMC IMMUNITY	Compliance to EN55015; EN61000-4-2,3,4,5,6,8,11, EN61547 Alight industry level （surge4KV）
Others	Weight	About 1.0Kg
	Size	21068.543mm（LWH）
	packing	324298176mm （LWH）
	Notes	1. All parameters NOT specially mentioned are measured at 110V/230VAC input , rated load and 25℃of ambient temperature. 2. Ripple& noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor. 3. Tolerance:includes set us tolerance,line regulation and load regulation .
Label