Super Crystal Polyurethane Two Component Resin For 3D Wall Sticker

Sales Super Crystal Polyurethane Two Component Resin For 3D Wall Sticker

MF:C15H16O2C2H7ONC3H5OCl

EINECS No.:231-072-3

Place of Origin:Guangdong, China

Classification:Double Components Adhesives

Main Raw Material:POLYURETHANE

Usage:Potting

Brand Name:jincheng

Model Number:518AB

Color:Clear

Shelf life:6 Months

Material:Polyuerthane

Yellow Resistance:More than 5years

Certificate:ROHS

Mixing Ratio:A:B=1:1

Product Detail  

                                           Super Clear PU Resin For Wall Sticker 

Product Description


Application

518AB is a two components polyurethane system with the mixing ratio of 1:1, can be cured under normal temperature and high temperature, it forms a very high gloss and transparent coating to its applications such as nameplate, signage and decorations. It is specially designed for the applications requires a soft and flexible clear coating. After cured, it will has a very good features of UV resistance and weather resistance, can be for outdoor use, and can meet the strict requirements for car raw materials, will not yellowing for about 3 to 5 years for outdoor use.

Features

1, With long pot life and fast heat curing to save time.

2, With low viscosity and good natural defoaming, come to a high gloss and bright surface after cured, without ripple.

3, Very high transparency, with good elasticity and bonding strength.

4, With very good weather and UV resistance for outdoor use, can be used at the temperature of 0 ℃ to 100 ℃.

Properties before Hardening

Part

518A

518B

Color

Transparent or light yellow

Transparent or light yellow

Viscosity (25 mpa·s)

250±50CPS

400±100 CPS

Mixing ratio

 A: B = 100:100(weight ratio)

Pot life

25℃×30min

Hardening conditions

25 ℃×24H or 65℃×3.5H or 80℃×2H

Shelf life(25, sealed)

6 Months

6 Months

Operation

Hand operation process( long pot life and curing slowly):

1, Place 518A and 518B at the temperature of 15 to 25 ℃, relative humidity lower than 70% for 12hours.

2, Well prepared the products you need to apply the 518AB such as the PVC signage/nameplate, metal signage/nameplate, put them into the oven to heat at the temperature of about 60 to clear the moisture on the surface.

3, Totally clear the dust and the oil on the surface of the signage/nameplate.

4, Weigh the 518A and the 518B by 1:1, and fully stir it.

5, Clear the bubbles by vacuum machine(the mixture will not have bubble at the -0.1 vacuum)

6, Take a clean syringe to draw the mixture and drop it to the surface of the well prepared signage/nameplate. Normally the thickness is 2mm.

7, Look at the glue in 5 minutes, if there is some bubbles, use a pin to break the bubbles, or if there is some area that has not been covered by glue, use the pin lead it.

8, Put the finished products in the oven at the temperature of about 60 to 80, it will cured in 2 to 3.5 hours.

Properties after Hardening

Test Item

Result

Appearance

Transparent

Hardnessshore A

50±5

Tensile strength,MPA

>2 

Elongation Ratio, %

>200

Storage And Shelf Life
1, Store at the temperature of 15~25°C, under the humidity of 70%. Avoid sunlight, high temperature or high humidity environment.

2, The feature of 518A maybe affected if contact with air, closed the 518A tightly after used. And 518A/B will absorb the moisture in the air easily, strictly avoid this happens.

3, When the mixture is more than 100g, the pot lift will be much shorter.

4, This is non-hazardous chemical, can transported as normal chemicals.

5, Better to clean the water content of 518B by vacuum before use.

Products Show

polyurethane resin


polyurethane resin castingpolyurethane resin clearpolyurethane resin kit

Our Services

Huizhou Jincheng Composite Materials Co., Ltd is the original factory specialized in producing epoxy resin, located in Huizhou City of Guangdong province. With high level QC control system, social responsibility system and certificates related, we are able to meet the industry requirements of different countries and regions with high quality products.

With the factory of more than 6000 square meters and auto OEM production line, we have very strict QC control system from raw material to final production. We have an experienced R&D team, and close contact with global research institutes, which provides our company lots of technical support. Our products selling network covers Americas, Australia, Europe and the Middle East.



company

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
X

Home

Supplier

Leave a message

Leave a message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.