PVDF Air operated double diaphragm pump with strong chemical resistance, crush resistance, abrasion resistance, good corrosion resistance for acid, alkali and variety of organic solvents.
AOK06/10-PVDF (Old Type) product description:
Air operated diaphragm pump (pneumatic membrane pump/AODD pump) is a kind of positive displacement pumps which volume changes caused by compressing diaphragms in both side. This pump not only can exhaust the flow liquid, but also can convey some uneasy flowed medium, with the merits of self priming pump, slurry pump and impurity pump, etc.
Advantages:
1- Wear resistance, high mechanical strength and toughness.
2- Weather resistance, anti-ultraviolet and nuclear rays.
3- The pump can work under water.
4- Has self-priming function, Very low shear force on the material.
5- Small size, light weight, easy to move and carry.
6- Can run empty, no danger.
7- It has good chemical stability, excellent chemical resistance, and good heat stability.
8- The flow can be adjusted, and a throttle valve can be installed at the material outlet to adjust the flow.
9- Explosion-proof, pneumatic diaphragm pump does not use electricity as power, after grounding will not produce electric spark.
10- It can pass through the liquid containing particles and is not easy to be blocked.
AOK06/10 PP (Old Type) Air Pump Parameters:
Model |
AOK06/10(Old Type) |
|
Inlet/ Outlet size |
mm |
6/10 |
inch |
1/4 or 3/8 |
|
Flow Rate
|
m3/h |
1.62 |
L/min |
27 |
|
Head (m) |
70 |
|
Suction Stroke (m) |
6.4 |
|
Max. Particle Diameter (mm) |
1.6 |
|
Max.Air Pressure (kg/cm²) |
7 |
|
Max.Air Consumption (m³/min) |
0.14 |
|
Diaphragm |
Teflon,Hytrel, Viton, Santoprene, Banu-N, etc. |
|
Check Valve |
PP, PVDF, POM |
|
Center block |
PP |
Performance curve:
Installation size:
Material Table
(More pumping medium pls contact us to confirm the suitable material)
Item |
Pump Body |
Diaphragm |
||||||
Medium |
Polypropylene |
Aluminum |
PVDF |
Stainless Steel |
Buna-N |
Geolast |
Viton |
Teflon |
Chloronaphthalene |
× |
× |
|
B |
D |
D |
C |
A |
Acetic Acid _ 50% |
|
× |
|
A |
C |
C |
C |
A |
Ammonium Bicarbonate |
|
B |
|
|
A |
A |
A |
A |
Ammonium Chloride |
A |
× |
A |
B |
A |
A |
A |
A |
Amyl Borate |
|
|
|
|
A |
B |
A |
A |
Aniline Dyes |
|
B |
|
B |
C |
C |
B |
A |
Barbeque Sauce |
|
|
|
A |
A |
A |
D |
A |
Beer |
A |
A |
A |
A |
C |
A |
A |
A |
Calcium Chloride |
A |
A |
A |
A |
A |
A |
A |
A |
Carbonic Acid (liquid) |
A |
|
|
B |
B |
A |
A |
A |
Diesel Oil |
B |
A |
A |
A |
A |
C |
A |
A |
Honey |
A |
A |
|
A |
D |
A |
D |
A |
Glue |
A |
A |
|
B |
A |
A |
A |
A |
Formic Acid |
A |
× |
A |
C |
C |
B |
C |
A |
Lactic Acid |
A |
A |
A |
A |
B |
B |
A |
A |
Hydrochloric Acid 30% |
B |
× |
A |
× |
C |
C |
B |
A |
Sulfuric Acid 50% |
A |
× |
A |
× |
C |
B |
A |
A |
A : Excellent - Recommended ;B : Good - minor to moderate effect; C : Poor - Moderate to severe effect; D : Unsatisfactory - not recommended |
More Options ( Parameters Table)
Model |
Flow (m³/h) |
Head (m) |
Suction Stroke(m) |
Max.Particle Dia. (mm) |
Max. Air Pressure (kg/cm²) |
Max.Air Consumption (m³/min) |
AOK06/10 |
0-1.62 |
0-70 |
6.4 |
1.6 |
7 |
0.14 |
AOK-15 |
0-3.42 |
0-84 |
7.6 |
2.5 |
8.4 |
0.56 |
AOK-25 |
0-9.42 |
0-84 |
8 |
4 |
8.4 |
1.12 |
AOK-40 |
0-21.48 |
0-84 |
8 |
5 |
8.4 |
2.24 |
AOK-50 |
0-35.22 |
0-84 |
8 |
6 |
8.4 |
2.8 |
AOK-80 |
0-63.6 |
0-84 |
8 |
9.4 |
8.4 |
9.8 |